Printer Features; Accessing User Tools; Changing Default Settings; Quitting User Tools - Ricoh Aficio MP C2030 Operating Instructions Manual

6. Printer Features

This chapter describes user tools in the Printer Features menu. For details on how to access Printer Features,
see "Accessing User Tools".

Accessing User Tools

This section describes how to access User Tools menu.
User Tools allow you to change or set defaults.
• Operations for system settings differ from normal operations. Always quit User Tools when you have
finished.
• Any changes you make with User Tools remain in effect even if the main power switch or operation
switch is turned off, or the [Energy Saver] or [Clear Modes] key is pressed.

Changing Default Settings

This section describes how to change the settings of User Tools.
• If Administrator Authentication Management is specified, contact your administrator.
1. Press the [User Tools/Counter] key.
2. Press the [ ] or [ ] key to select [Printer Features], and then press the [OK] key.
3. Change settings by following instructions on the display, and then press [OK] key.

Quitting User Tools

This section describes how to quit the settings of User Tools.
BHM003S
6
109