Introduction; Warnings - Dantherm Flexibox 900 Quick Setup Manual

Introduction

FB-900-DC-G4
FB-900-DC-DO-G4
Warning
Caution
Safety
Copyright
Reservations
Quick setup guide
Introduction
This is the quick setup guide for the Dantherm Flexibox 900 .
The Flexibox is available in different variants according to the following notation.
Filtertype:
G4
M5
Voltage
DC 48
AC 230 50/60 Hz
Flexibox 900
Filter type:
G4
M5
Direction of airflow
Down
Up
Voltage
DC 48
AC 230 50/60 Hz
Flexibox 900
Not following these instructions could result in death or serious injury
Not following these instructions could result in injury or property damage.
The symbol means something that should NOT be done
Project safety is your responsibility!
Follow the instructions in this quick setup guide regarding the installation and use of the product.
Not following these instructions could result in injury, death, or damage to equipment.
All work should be performed by qualified personal using safe work practices.
All proper personal protective equipment should be used.
PPE required for this installation includes but is not limited to:
•
Safety glasses
•
Hard hat
•
Safety shoes
•
Hearing protection
•
Cut resistant gloves
•
Face shield
•
Proper work attire (long sleeve shirt and long pants)
Please strictly observe the following: Special skills are required to install the Dantherm Flexibox
unit. Non-qualified personnel should not attempt any of the actions shown in this quick guide.
Dantherm shall not be responsible for improper installation or any accidents, damage, or injury
resulting from improper installation.
Copying of this service manual, or part of it, is forbidden without prior written permission from
Dantherm Air Handling A/S.
Dantherm reserves the right to make changes and improvements to the product and the ser-
vice manual at any time without prior notice or obligation.
Part number of this quick setup guide is 093418
3