D-Link DSL-2877AL Modem Router User Manual
System Log
To access the System Log page, click on the Management menu link at the top, and then click on the System Log menu link on the left.
This page displays event log data in the chronological manner. You can read the
event log from the local host or send it to a system log server. Available event
severity levels are as follows: Emergency, Alert, Critical, Error, Warning, Notice,
Informational and Debugging. In this page, you can enable or disable the system log
function.
To log the events, take the following steps.
Step1 Select Enable Log check box.
Step2 Select the display mode from the Mode drop-down list.
Step3 Enter the Server IP Address and Server UDP Port if the Mode is set to Both
or Remote.
Step4 Click Apply to apply the settings.
Step5 Click View System Log to view the detail information of system log.
Page 79