D-Link DSL-2877AL Modem Router User Manual
MAC Filtering
This page is used to permit or block access to this router from host with MAC address
contained in the Access Control List..
Step1 Choose the Wireless SSID to be configured.
Step2 Set the Access Control Mode, and click Submit.
Disable: Disable the function of access control.
Allow: Allow the specified wireless clients to connect the 2.4G wireless
network of the 2877AL.
Deny: Block the specified wireless clients to connect the 2.4G wireless
network of the 2877AL.
Step3 Click Add. The page shown as the following figure appears.
Step4 Enter the MAC address of the PC to be filtered.
Step5 Enter the comment.
Step6 Click Apply to take the settings into effect.
Page 38