Table of Contents
Advertisement
Using an External Speaker System for Playback (AUX OUT [L/L+R]/[R] jacks)
You can connect a stereo system to amplify the instrument's sound by using the AUX OUT [L/L+R]/[R]
jacks. The microphone or guitar sound connected to the instrument's [MIC/LINE IN] jack is output at the
same time.
NOTICE
• To avoid possible damage, first turn on the power to the instrument, then to the external device. When turning off the power,
first turn off the power to the external device, then to the instrument. Since this instrument's power may automatically be
turned off due to the Auto Power Off function (page 19), turn off the power to the external device, or disable Auto Power Off
when you do not intend to operate the instrument.
• Do not route the output from the AUX OUT jacks to the [AUX IN] jacks. If you make this connection, the signal input at the [AUX
IN] jacks is output from the AUX OUT jacks. These connections could result in a feedback loop that will make normal
performance impossible, and may even damage the equipment.
Standard phone
plug (1/4")
NOTE
• Use audio cables and adaptor plugs having no (zero) resistance.
• Use only the [L/L+R] jack for connection with a monaural device.
• Use an appropriate adaptor plug if the input jack of the powered speaker does not match the phone plug of the audio cable.
• When you are monitoring the sound output via the AUX OUT jacks from headphones connected to the instrument, we recommend that
you set the Binaural Sampling and Stereophonic Optimizer functions to off. For details, refer to page 21.
Instrument
Audio cable
Audio signal
Powered speaker
Input jack
Standard phone
plug (1/4")
CVP-809/CVP-805 Owner's Manual
10
107
Advertisement
Table of Contents
