Table of Contents
Advertisement
Using the Multi Pad Synchro Start Function
You can also start Multi Pad playback by playing the keyboard or by starting Style playback.
1
While holding the MULTI PAD CONTROL [SELECT] button, press
the desired button or buttons from [1]–[4].
The corresponding buttons flash in red, indicating standby status.
2
Start playback of the Multi Pad.
• When [ACMP] is off, press any note, or play back a Style.
• When [ACMP] is on, play a chord in the chord section, or play back a Style.
If you enable standby for a Multi Pad during Style or Song playback, pressing any
note (when [ACMP] is off) or playing a chord in the chord section (when [ACMP]
is on) will start Multi Pad playback at the top of the next measure.
NOTE
To cancel the standby status of the
selected Pad, carry out the same opera-
tion, or simply press the [STOP] button
to cancel the status of all Pads.
NOTE
When two or more Multi Pads are in
standby status, pressing any one of
them starts simultaneous playback of
all of them.
PSR-SX900/SX700 Owner's Manual
2
65
Advertisement
Table of Contents
