Table of Contents
Advertisement
Power Supply
Connect the AC adaptor in the order shown in the illustration.
DC IN jack
(page 18)
WARNING
Use the specified AC adaptor (page 119) only. Using the wrong AC adaptor can result in damage to the instrument or overheating.
CAUTION
When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn
the power off and disconnect the plug from the outlet.
NOTE
Follow the order shown above in reverse when disconnecting the AC adaptor.
Turning the Power On/Off
1
Turn down the [MASTER VOLUME] dial to "MIN."
2
Press the [
After a brief interval, the Home display (page 26) appears. Adjust the volume as
desired while playing the keyboard.
2
3
After you finish using the instrument, turn off the power by
pressing and holding the [
second.
20
PSR-SX900/SX700 Owner's Manual
Starting Up
2
AC adaptor
The shape of the plug and outlet differs depending on your area.
] (Standby/On) switch to turn the power on.
] (Standby/On) switch for about a
3
1
Power cord
AC outlet
NOTE
Until the Home display appears, no
operations can be carried out, including
power-off and keyboard performance.
CAUTION
Even when the [
] (Standby/On)
switch is turned off, electricity is
still flowing to the product at the
minimum level. When you are not
using the product for a long time,
make sure to unplug the power
cord from the wall AC outlet.
NOTICE
When recording or editing, or
while a message is displayed,
the power cannot be turned off
even if you press the [
]
(Standby/On) switch. If you want
to turn off the power, press the
[
] (Standby/On) switch only
after recording, editing, or after
the message has disappeared. If
you need to force-quit the instru-
ment, hold down the [
]
(Standby/On) switch for longer
than three seconds. Note that the
force-quit operation might cause
data loss and damage to the
instrument.
Advertisement
Table of Contents
