Sony SRP-X500P Interface Manual page 31

♦ FR (50th-53rd byte)
The FR parameter consists of the 4 bytes of data in the order shown in the following table.
Byte Parameter
1st MIC 1/WL 1 FR
2nd MIC 2/WL 2 FR
3rd MIC 3 FR
4th MIC 4 FR
•
FR
Shows the status of the FEED BACK REDUCER. The correspondence of the parameter with
the FEED BACK REDUCER setting is shown in the following table.
FR
Turned off
Turned on
Setting up in progress
Cancellation in progress
♦ FR SETUP STATUS (54th and 55th byte)
The FEED BACK REDUCER setup status parameter consists of the 2 bytes of data in the order shown
in the following table.
Byte Parameter
1st SETUP CHANNEL
2nd SETUP STATUS
•
SETUP CHANNEL
Shows the channel for which the FEED BACK REDUCER setting is in progress.
The parameter and the channel are shown in the following table.
Channel
Normal operation
MIC 1/WL 1
MIC 2/WL 2
MIC 3
MIC 4
CANCEL
SRP-X500P RS-232C Interface Manual
0x30 ('0')
0x31 ('1')
0x32 ('2')
0x33 ('3')
0x30 ('0')
0x31 ('1')
0x32 ('2')
0x33 ('3')
0x34 ('4')
0x35 ('5')
Page 31/43