Remote Fader Level Parameter Request - Sony SRP-X500P Interface Manual

•
LEVEL (2nd byte)
The level for each fader can be specified (in dB units).
The parameter and the level are as shown in the following table.
Level
-∞
-70.0
-60.0
-55.0
-50.0
-45.0
-40.0
-35.0
-32.5
-30.0
-27.5
-25.0
-24.0
-23.0
-22.0
-21.0
Example
To set the REMOTE fader 1 to 0 dB
0x43 0x4C 0x56 0x4C 0x42 0x59 0x0D
('C L V L B Y CR')
2.1.8 REMOTE FADER LEVEL PARAMETER REQUEST : 0x52 0x4C 0x56
0x4C ('RLVL')
This command is used to read the master volume and REMOTE fader level settings from the SRP-X500P.
Packet format
0x52 0x4C 0x56 0x4C 0x0D
Return packet format
When the SRP-X500P receives the command successfully, the parameter is returned together with an ACK
(0x41 ('A')) in the order shown below.
0x41 parameter" 0x0D
"
SRP-X500P RS-232C Interface Manual
Level
0x30 ('0') -20.0 0x40 ('@')
0x31 ('1') -19.0 0x41 ('A')
0x32 ('2') -18.0 0x42 ('B')
0x33 ('3') -17.0 0x43 ('C')
0x34 ('4') -16.0 0x44 ('D')
0x35 ('5') -15.0 0x45 ('E')
0x36 ('6') -14.0 0x46 ('F')
0x37 ('7') -13.0 0x47 ('G')
0x38 ('8') -12.0 0x48 ('H')
0x39 ('9') -11.0 0x49 ('I')
0x3A (':') -10.0 0x4A ('J')
0x3B (';') -9.0 0x4B ('K')
0x3C ('<') -8.0 0x4C ('L')
0x3D ('=') -7.0 0x4D ('M')
0x3E ('>') -6.0 0x4E ('N')
0x3F ('?') -5.0 0x4F ('O')
Page 11/43
Level
-4.5 0x50 ('P')
-4.0 0x51 ('Q')
-3.5 0x52 ('R')
-3.0 0x53 ('S')
-2.5 0x54 ('T')
-2.0 0x55 ('U')
-1.5 0x56 ('V')
-1.0 0x57 ('W')
-0.5 0x58 ('X')
0 0x59 ('Y')