Sony SRP-X500P Interface Manual page 28

♦ OUTPUT MUTING (31st and 32nd byte)
Shows the muting status of the output channels.
The OUTPUT MUTING parameter consists of the 2 bytes of data in the order shown in the following
table.
Byte Parameter
1st SPEAKER OUTPUT MUTING
2nd LINE OUTPUT MUTING
•
SPEAKER OUTPUT MUTING
Shows the muting status of the speaker output channels in the form of 8 bits of data.
The bit is 0 for a channel which is not turned off (
turned off ( Muting on").
"
MSB
bit7
0
•
LINE OUTPUT MUTING
Shows the muting status of the LINE OUTPUT channels in the form of 8 bits of data.
The bit is 0 for a channel which is not turned off (
turned off ( Muting on").
"
MSB
bit7
0
♦ MASTER MUTING (33rd byte)
Shows the muting setting of the master volume.
The parameter and the muting setting are as shown in the following table.
MUTING
Muting off 0x30('0')
Muting on 0x31('1')
♦ REMOTE MUTING (34th byte)
Shows the muting status of the REMOTE 1-6 faders in the form of 8 bits of data.
The bit is 0 for a channel which is not turned off (
off ( Muting on").
"
MSB
bit7 bit6
0 1
SRP-X500P RS-232C Interface Manual
bit6 bit5 bit4
1 0 0
bit6 bit5 bit4
1 0 0
Muting off") and 1 for a channel which is turned
"
bit5 bit4 bit3
CH 6 CH 5 CH4
Page 28/43
Muting off") and 1 for a channel which is
"
LSB
bit3 bit2 bit1 bit0
CH4 CH3 CH 2 CH 1
Muting off") and 1 for a channel which is
"
LSB
bit3 bit2 bit1 bit0
CH4 CH3 CH 2 CH 1
LSB
bit2 bit1 bit0
CH3 CH 2 CH 1