Moving Recorded Tracks; (Move Function) - Sony ZS-M7 Operating Instructions Manual

Moving recorded
tracks

(Move Function)

You can change the order of the tracks.
After you move the track, the track
numbers are renumbered automatically.
Note
After you
stop
recording,
do not disconnect the
AC power cord or
move the player
while "TOC EDIT" is
flashing in the
display. If you do so,
recording may not be
done properly.
38 GB
Editing recorded tracks on the MD
Example: Moving C to the position of track 1
Track
2
1
number
A
Moving
Track number of the C changes to 1
1
C
1
Play the track you want to move.
2
Press EDIT repeatedly until "Track Move" appears
in the display.
3
Press ENTER•YES.
"nTrack 003?" appears in the display, and one-
track repeat play starts.
4
Turn the jog dial to select the new track position.
If you want to cancel the move function at this
point:
Press CANCEL•NO or MD p.
5
Press ENTER•YES.
"Complete" appears in the display for a few
seconds after the track is moved.
Jog dial
EDIT
3
4
B
C
4
2 3
A B
ENTER•YES
D
D