Sony ZS-M7 Operating Instructions Manual page 53

Tip
If there is no sound
input for more than 2
seconds during
recording, a track mark
is stamped
automatically.
Recording the sound from the connected
components
1 Insert a recordable MD.
2 Press LINE on the front panel to display "LINE".
3 Press REC.
Recording does not start (recording standby
mode).
4 Press MD ^.
5 Play the optional component connected to the
LINE IN jack of the player.
If the volume of the component connected to the
LINE IN jack is too high
Press LINE LEVEL to display "Level: High" or reduce
the volume of the connected component.
LINE LEVEL
Setting Up
53 GB