Moving Recorded Tracks (Move Function); Labeling Recordings (Title Function) - Sony MDS-JE520 Operating Instructions Manual

Moving Recorded Tracks
(Move Function)
Use the Move Function to change the order of any
track. After you move a track, the track numbers
between the new and old track positions are
automatically renumbered.
Example: Moving track C to track position 2
Track
1 2
number
A B
Moving
1
2
A C
MENU/NO
1
While the deck is stopped, playing, or pausing,
press MENU/NO to display "Edit Menu".
2
Turn AMS until "Move ?" appears in the display.
3
Press AMS or YES.
4
Turn AMS to select the track to be moved and
press AMS or YES.
5
Turn AMS until the new track position appears.
Track number New track
to be moved position
6
Press AMS or YES.
"Complete!!" appears for a few seconds and the
moved track begins playing back.
To cancel the Move Function
Press MENU/NO or p.
3 4
C D
Track C moves to
track position 2
3 4
B D
YES
§
EJECT
≠ ±
AMS
0 ) r
·
P p
≠ AMS ±
Editing Recorded MDs
Labeling Recordings
(Title Function)
You can create titles for your recorded MDs and tracks.
Titles — which may consist of uppercase and
lowercase letters, numbers and symbols for a
maximum of about 1,700 characters per disc — appear
in the display during MD operation. You can also use
the remote to label a track or an MD (see "Labeling
tracks and MDs with the remote" on page 35).
LEVEL/DISPLAY/CHAR MENU/NO
Use the following procedure to label a track or an MD.
You can label a track while it is playing, pausing or
recording. If the track is recording, be sure to finish
labeling before the track ends. If the track ends
before you've completed the labeling procedure,
the characters already entered are not recorded and
the track will remain unlabeled.
1
Press MENU/NO to display "Edit Menu".
2
Turn AMS until "Name ?" appears in the display
and press AMS or YES.
Skip this step while recording.
3
Turn AMS until "Nm In ?" appears in the display,
then press AMS or YES.
4
Turn AMS to select "Disc" to label an MD, or to
specify the track to label.
While recording, go to Step 6.
5
Press AMS or YES.
A flashing cursor appears in the display.
0/)
YES
§
EJECT
≠ ±
AMS
0 ) r
·
P p
≠ AMS ±
(Continued)
33 EN