J - Regulatory & Warranty Information; Regulatory Information - FLIR PTU-5 User Manual

E - Regulatory & Warranty
Information
E.1 - Regulatory Information
Electromagnetic Interference (EMI) is any signal or emission, either radiated in free space or conducted
along power or signal leads, that endangers the function of a radio navigation or other safety service or
that seriously degrades, obstructs, or repeatedly interrupts a licensed radio communications service.
Class A
Class A equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at his/her own
expense.
FLIR PTUs using a cable length of 7' or less, and using the PT-PS-INT30V power supply have been tested
to comply with FCC Class A requirements. Full compliance in systems using a 3' motor cable requires an
external direct connection from either the controller or the PTU head to earth ground.
Caution: Changes or modifications of this equipment not expressly approved by manufacturer could
result in violation of Part 15 of the Federal Communication Commission's rules. The FCC has prepared
the following booklet: "How to Identify and Resolve Radio-TV Interference Problems." It is available from
the US Government Printing Office, Washington DC, 20402. Stock Number 004-00-00345-4.
FCC Notice
According to 47CFR, Parts 2 and 15, Subpart B Class A:
This device complies with FCC Part 15, Subpart B Class A of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, (2) This device must accept
any interference received including interference that may cause undesired operations.
CE Notice
This is a Class A product. In a domestic environment, this product may cause radio interference, in which
case the user may be required to take adequate measures.
C-1
Copyright 2017, FLIR Commercial Systems, Inc.