FLIR PTU-5 User Manual page 16

5. Launch a Web browser. The PTU supports modern versions of the Microsoft Internet Explorer®,
Mozilla® Firefox®, and Google® Chrome® browsers with JavaScript enabled.
6. Run the PTU Finder utility from the CD included with your PTU package. A list of the individual PTUs
currently connected to the network and their corresponding IP addresses will appear in the
application window.
Note: If you have simultaneous Ethernet and serial connections to a PTU, you may enter
NI in the terminal to retrieve the IP address of the PTU.
7. In your browser, navigate to the
appropriate IP address (such as http:/
/192.168.1.101). A web page
appears when you are connected to the
selected PTU. The PTU Web interface
allows you to configure the network
interface, configure various parameters,
and control the PTU.
8. Navigate to the PTU Control page.
9. Click the arrows to pan and tilt the PTU
and verify that it is working properly.
You can use the Units radio buttons to
specify the units to use (either Degrees
or Steps).
Please refer to the Pan-Tilt E Series
Command Reference Manual for
instructions on using the Web interface.
12
Copyright 2017, FLIR Commercial Systems, Inc.
PTU-5 User Manual