Programmed Playback - Teac MC-DX40 Owner's Manual

Up to 32 tracks/files can be programmed in the desired order.
<
Set a disc before programming.
<
Files in an USB memory device cannot be programmed.
1 Press the FUNCTION button to select "CD" or "USB".
2 Press the MEMORY button.
"Mem" is displayed.
CD
MP3
folder number is flashing
<
To cancel the program mode, press the stop button (H).
Press the skip button (. or /) repeatedly to select a
3
MP3/WMA folder, then press the MEMORY button.
MP3
file number is flashing
<
MP3 files recorded out of folders are in the "001" (ROOT) folder.
<
Skip this step when playing an audio CD.
18

Programmed Playback

FUNCTION
y/J
.//
MEMORY
Press the skip button (. or /) repeatedly to select a
4
track, then press the MEMORY button.
CD
MP3
The track/file is programmed, and "P-02" is displayed.
<
Repeat steps
<
You can program up to 32 tracks.
5 When the selection of track numbers is completed, press
the play/pause button (G/J) to start program playback.
<
When the playback of all the programmed tracks/files has
finished, or if you press the stop button (H), the "Mem" indicator
will go off and the program mode will be cancelled. Still the
program is retained in memory.
You can return to the programmed playback by pressing the
MEMORY button and the play/pause button (G/J).
<
Shuffle function does not work during programmed playback.
<
When there is a folder which contains the files other than MP3
and WMA (such as JPEG files) is included in a disc, the program
may not function correctly. Program the MP3 and WMA files only.
3 4
and to program more tracks/files.