Programmed Playback - Teac DC-D6300 Owner's Manual

Programmed Playback

6
1
3
4
2 5
Up to 20 tracks from 3 discs can be programmed in the desired
order.
Shuffle, Repeat and Intro check functions don't work during
programmed playback.
1 Press the CD button or the FUNCTION button to select
"CD".
2 Press the PROGRAM button.
"TRACK", "MEMORY", and the current disc number blinks
on the display.
< To cancel the program mode, press the STOP button.
< When no button is pressed for 10 seconds, the program
mode will be cancelled.
3 If you want to select another disc, press the
corresponding button or the DISC SKIP button.
18
4
Press the SKIP button (.or/) repeatedly to select
a track.
5 Press the PROGRAM button.
The track is programmed, and "P-02" is displayed.
< Repeat step 3 to 5 to program more tracks.
< You can program up to 20 tracks.
6 When the selection of track numbers is completed,
press the PLAY/PAUSE button to start program
playback.
< If the PLAY/PAUSE button isn't pressed within 10 seconds, the
MEMORY indicator will go off. In that case, press the
PROGRAM button and then press the PLAY/PAUSE button to
start program playback.
< When the playback of all the programmed tracks has finished,
or if one of the following buttons is pressed, the MEMORY
indicator will go off and the program mode will be cancelled:
STOP, FUNCTION (TAPE, AUX/PHONO, TUNER), POWER
DISC SKIP, DISC 1,2,3
But the programmed contents aren't lost. You can return to
the programmed playback by pressing the PROGRAM button
and the PLAY button. (If another source was selected, press
the CD button beforehand.)
7 Doucement déplacer le bras vers le bord du disque (ou
le point de départ d'une piste).
La table tournante commence à tourner.
8 Doucement abaisser le bras en relâchant doucement le
levier de re-pérage.
Vous pouvez abaisser le bras manuellement si le levier de
repérage n'a pas été utilisé.
levier de repérage
9 Tournez le bouton du VOLUME pour régler le volume.
< Tenant le couvercle baissé durant l'écoute de disque empêche
la poussière de se déposer sur la table tournante.
S'il vous plait ne jamais déposer aucun object sur le
dessus du couvercle de la platine, surtout si vous jouez
un disque.
Quand l'écoute est terminée, soulevez légèrement le bras
utilisant le levier de repérage et le retourner à son appui.
La rotation s'arrête.
bras
levier de repérage
43