Speaker Installation - Teac MC-DX40 Owner's Manual

You can mount the main unit and/or the left and right speakers on a
wall. Or you can stand the speakers in vertical position.
Precautions
<
Be aware that the length of the cables are approximately 2 m.
Do not attempt to mount the main unit and the speakers too far
from the subwoofer.
<
To hook the speakers on the wall, drill holes into solid wall
support, such as wooden frame or concrete wall.
<
TEAC supplies the wall mounting brackets as a convenience
to the product owner. Consult your local building codes and
exercise all necessary caution when mounting these brackets. If
you are unsure how to use the supplied brackets, consult with a
local tradesmen or building supply expert.
To hook on the wall
1. Fix the metal brackets on the rear panel of the speakers
using the supplied screws.
2. Use the supplied guide sheet to mark the exact drilling
points on the wall.
3. Drill holes in the wall at the marked points.
4. Secure the plastic bracket for the main unit on the wall
using four commercially available screws.
5. Screw two commercially available screws on the position
of each speaker.
Leave about 3 mm space between the screw's head and the wall.
6. Before going on, make connections between the subwoofer
and the speakers by referring to pages 6-7.

Speaker Installation

7. Carefully hang the main unit on the screws of the bracket
for main unit, and hang the speakers onto the screws on
the wall.
Note:
Ensure that the speaker locks onto the hooks and that the hooks
are strong enough to support the weight before removing your
hands.
To stand the speakers in the vertical position
You can stand the speakers in the vertical position.
1. Remove the screws to detach the speaker stand.
2. Reattach the stand in the vertical position.
Main unit Speaker
5