Teac MC-DX40 Owner's Manual page 26

6 Press the SKIP button (.//) to select a source (Radio,
CD or USB), and then press the TIMER button.
<
"AUX" cannot be selected.
7 Press the SKIP button (.//) to set the volume, and
then press the TIMER button.
Setting the timer is now completed and the timer is turned on.
Your timer on/off setting is displayed in order.
8 Prepare the source.
If you selected "Radio" in step
If you selected "CD" in step
If you selected "USB" in step
26
Setting the Timer 2
6 , tune in a station.
6 , set a disc.
6 , connect an USB memory device.
9 Press the STANDBY/ON button to turn the unit off
(standby).
The clock and the TIMER indicator are displayed.
The unit will turn on and off at the specified time every day.
Do not forget to turn the unit off (standby), or the timer
will not work.
If the power switch of the subwoofer turned off, the clock
will be reset.
Do not turn off the subwoofer, or the timer will not work.
<
Playback volume will gradually increase up to your set volume
when the unit is turned on by timer.
<
If the source is set to "USB" but no USB memory device is
connected, the unit will turn on into Radio mode.
<
If the source is set to "CD" but no disc is set, the unit will turn on
into Radio mode.
<
When the source is set to "Radio" and the unit turns on, it will
tune in to the station you selected last time.
To turn on or off the timer
Press the TIMER button once, and during the timer settings being
displayed press again to turn it on or off.