Programmed Playback - Teac EX-M5 Owner's Manual

Up to 64 tracks can be programmed in the desired order.
Shuffle and Repeat functions don't work during programmed
playback.
1 Press the CD or the FUNCTION button to select "CD".
2
Press the MEMORY button.
"MEMORY" lights up in the display.
< To cancel the program mode, press the Stop button (H).
3 Press the Skip button (.or/) repeatedly to select a
folder of a MP3 disc, then press the MEMORY button.
< MP3 tracks recorded out of folders are in the "01" (ROOT)
folder.
< Skip this step when playing a CD.
14

Programmed Playback

MEMORY
4
< Repeat steps
< You can program up to 64 tracks.
5
< When the playback of all the programmed tracks has finished,
CD PLAY/PAUSE
STOP
SKIP
Press the Skip button (.or/) repeatedly to select a
track, then press the MEMORY button.
The track is programmed, and "P-02" is displayed.
3 and 4 to program more tracks.
When the selection of track numbers is completed,
press the Play/Pause button (G/J) to start programmed
playback.
or if one of the following buttons is pressed, the MEMORY
indicator will go off and the program mode will be cancelled:
STOP, FUNCTION, POWER
The program is retained in memory until the OPEN/CLOSE
button is pressed or the power is interrupted. You can return
to the programmed playback by pressing the MEMORY
button and the Play/Pause button (G/J) in the stop mode. (If
another source was selected, select the CD mode by pressing
the CD button beforehand.)