Led Array For Tank Fill Level - Fiat Capron T58 Manual

Off-load voltage
Measures:
9.5.3
Display fill level:
Level indicator
EN
Capron - 04-17 - CAP-0017-01
Measuring the off-load voltage is a simple method to check the condition of the
battery. The off-load voltage is the voltage of the battery in idle condition, when
current is neither supplied nor consumed.
The following table helps to correctly interpret the displayed battery off-load
voltage. The specified values are guide values for dryfill batteries.
LT 100 indicator
Red LED flashes
Red and yellow LED are
lit
Red and yellow LED are
lit
Red, yellow, and lower
green LED are lit
All LEDs light up
Total discharge causes irreparable damage to the battery.
When the battery alarm comes on, switch off the appliances and charge the
living area battery, either by mobile operation or by connection to a 240 V
power supply.

LED array for tank fill level

The LED array (Fig. 69,6) displays the fill level of the fresh water tank or of the
waste water tank.
Press " " button (Fig. 69,4): The fill level of the fresh water tank is dis-
played by lit LEDs.
Press " " button (Fig. 69,5): The fill level of the waste water tank is dis-
played by lit LEDs.
LED indicator
All LEDs light up
3 LEDs light up
2 LEDs light up
1 LED lights up
Bottom LED flashes
Further information can be obtained in the manufacturer's instruction
manual.
Electrical system
Off-load voltage values
11.6 V or less
11.6 V to 12.0 V
12 V to 12.3 V
12.3 V to 13.5 V
Over 13.5 V
Tank fill level
Full tank
Tank approx. 3/4 full
Tank approx. 1/2 full
Tank approx. 1/4 full
Tank empty
9
Battery charge
Battery is fully
discharged
Battery is discharged to
totally discharged
Battery is empty or
charged up to approx.
50 %
Battery is charged from
approx. 50 % to fully
charged
(Only appears while
charging)
83