Care; External Care; General; Washing With A High-Pressure Cleaner - Fiat Capron T58 Manual

12.1
12.1.1
12.1.2
EN
Capron - 04-17 - CAP-0017-01
Chapter overview
This chapter contains instructions regarding the care of the vehicle.
The instructions address the following topics:
exterior of the vehicle
interior
water system
extractor hood
winter operation
At the end of the chapter there is a checklist of measures you must carry out
if you are not going to use the vehicle for an extended period of time.
The checklist address the following topics:
temporary lay-up
winter lay-up
start-up after a lay-up

External care

General

Standard external care consists of regular washing. The use and the environ-
mental conditions will determine how often the vehicle needs to be washed.
Wash the vehicle more frequently in areas which are exposed to heavy air pol-
lution or heavy traffic or roads treated with de-icing salts. If the vehicle is
exposed to salty and humid air (coastal areas, humid climates), wash the
vehicle more frequently.
Do not park under trees if at all possible. The resin-like discharge which many
trees secrete, give the paintwork a matt look and can promote the onset of
corrosion.
Wash off bird droppings straight away and thoroughly, as the acid it contains
is extremely corrosive.

Washing with a high-pressure cleaner

Do not clean the tyres with a high-pressure cleaner. The tyres might be
damaged.
Do not spray external applications (deco-films) directly with the
high-pressure cleaner. The external applications could come off.
Before cleaning the vehicle with a high-pressure cleaner, observe the oper-
ating instructions of the high-pressure cleaner.
When cleaning with the nozzle for circular jet between the vehicle and the
cleaning nozzle, maintain a minimum distance of approx. 700 mm.
Take into consideration that the jet of water comes out of the cleaning nozzle
with pressure. The vehicle may be damaged by incorrect handling of the
high-pressure cleaner. The temperature of the water should not be above
60 °C. Keep the jet of water in constant movement during the washing
process. Do not direct the water jet at clearances, built-in electrical parts,
plugs, seals, the ventilation grill or the skylights. The vehicle may be damaged
or water may enter the interior.
12

Care

12Care
119