Table of Contents
Advertisement
Installing and Connecting the External Power Supply Shelf
Installation Procedures
Installation Procedures
Summary
Follow these steps to install the Power Supply Shelf. The rest of this chapter
provides details on these steps.
1.
2.
3.
4.
5.
6.
At this point, your unit is fully installed. See the rest of this chapter if you need
more detailed information on any of these installation steps.
2-2
Prepare the installation site
ronment into which the unit will be installed is properly prepared,
including having the correct cabling ready to connect to the unit and
having an appropriate location for the unit. See
precautions.
Mount the unit
(page
rack, in an equipment cabinet, or on a horizontal surface.
Install the power supplies
come with power supplies. You must purchase them separately and install
them.
Connect the Power Supply Shelf to a switch
supplied EPS cables, connect the unit to the devices that it will support.
Connect AC power to the unit
plug it into a nearby main AC power source.
Verify the unit is operating correctly
process of observing that the LEDs on the unit's front panel indicate
correct operation.
(page
2-4). Make sure the physical envi-
2-4). The unit can be mounted in a 19-inch telco
(page
2-8). The Power Supply Shelf does not
(page
2-10). Once the unit is mounted,
(page
page 2-3
for installation
(page
2-9). Using the
2-11). This is a simple
Advertisement
Table of Contents
Need help?
Do you have a question about the zl Series and is the answer not in the manual?
Questions and answers