Installing and Connecting the External Power
Supply Shelf
The Power Supply Shelf comes with an accessory kit that includes the
brackets for mounting the unit in a standard 19-inch telco rack or in an
equipment cabinet, and rubber feet that can be attached so the unit can be
securely located on a horizontal surface. The brackets are designed to allow
mounting the unit in a variety of locations and orientations.
This chapter shows you how to install the Power Supply Shelf including:
■
■
■
Included Parts
The Power Supply Shelf has the following components shipped with them:
■
■
■
■
■
included parts
(page
2-1)
installation procedures
recommended connection topologies
ProCurve Switch zl Power Supply Shelf Installation and Getting Started
Guide, this manual
Read Me First
Customer Support/Warranty booklet (5990-8862)
Accessory kit
(5070-3028)
• two mounting brackets
• eight 8-mm M4 screws to attach the
mounting brackets to the unit
• four 5/8-inch number 12-24 screws to
attach the unit to a rack
• four rubber feet
Two EPS cables, (5070-0102)
(page
2-2)
(page
2-12)
2
2-1