Before First Use - IKEA HYGIENISK Manual

ENGLISH
AutoOpen is automatically activated with
all programmes excluding
applicable).
To improve the drying performance refer to
the DryPlus option or activate AutoOpen.
Do not try to close the appliance
door within 2 minutes after
automatic opening. This can
cause damage to the appliance.

Before first use

1. Make sure that the current level of the
water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
How to deactivate AutoOpen
Make sure the appliance is in user mode.
1. Press
(if
2. Press
3. Press on/off to confirm the setting.
The salt container
The salt is used to recharge the resin in the
water softener and to assure good washing
results in daily use.
If children, pets or people with
disabilities have access to the
appliance, deactivate AutoOpen.
The automatic opening of the
door may pose a danger and
expose possible hazards inside
the appliance (such as knives,
sharp objects, chemicals).
.
• The indicators
and are off.
• The indicator
• The display shows the current setting
– = AutoOpen is deactivated.
– = AutoOpen is activated.
to change the setting.
After starting a programme, it
may take up to 5 minutes for the
appliance to recharge the resin
in the water softener. It seems
that the appliance is not working.
The washing phase starts only
after this procedure is completed.
The procedure is repeated
periodically.
Caution! Use rough salt
designed for dishwashers only.
Fine salt increases the risk of
corrosion.
15
, , ,
still flashes.