IKEA HYGIENISK Manual page 13

ENGLISH
German degrees
(°dH)
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent or
multi-tabs (with or without salt), set the
proper water hardness level to keep the
salt refill notification active.
Multi-tabs containing salt are not
effective enough to soften hard
water.
How to set the water softener level
Make sure the appliance is in user mode.
1. Press .
• The indicators
and
• The indicator
• The display shows the current setting:
e.g. = level 5.
2. Press repeatedly to change the
setting.
3. Press on/off to confirm the setting.
The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
French degrees
(°fH)
33 - 39
26 - 32
19 - 25
7 - 18
<7
, ,
are off.
still flashes.
mmol/l Clarke de-
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
rinse aid. If the drying results are
satisfactory while using multi-tablets only, it
is possible to deactivate the notification for
refilling rinse aid. However, for best drying
performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid empty
notification
Make sure the appliance is in user mode.
,
1. Press
• The indicators
• The indicator
• The display shows the current setting.
–
–
2. Press
3. Press on/off to confirm the setting.
The rinse aid level
It is possible to set the released quantity of
rinse aid between level 1 (minimum
Water softener level
grees
23 - 27
18 - 22
13 - 17
5 - 12
< 5
.
,
are off.
still flashes.
= the rinse aid empty
notification is deactivated.
= the rinse aid empty
notification is activated.
to change the setting.
13
1)
5
4
3
2
2)
1
, , and