Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Silhouette Racing Series
Summary of Contents for Silhouette Racing Series
- Page 1 Technical Instructions - Racing Collection...
-
Page 2: Racing Collection - Glazing
Other lens base curves can be used and will require bridge adjustment Recommended lenses are High Index 1.6, 1.67, Polycarbonate and Trivex Use Silhouette mounting plier with blue tip and BLS 58/98/97 OMA shape files and drill coordinates are available at www.silhouettelab.com... -
Page 3: Racing Collection - Inclination
Racing Collection - Inclination 1. Open the temple fully 2. Support lens mounting firmly with mounting pliers and blue tip 3. Hold temple at hinge and adjust inclination to the desired position... -
Page 4: Racing Collection - Enlarge Temple Opening
Racing Collection – Enlarge temple opening 1. Open the temple fully 2. Support lens mounting firmly with mounting pliers and blue tip 3. Press temple outward applying pressure at hinge pivot with your thumb... -
Page 5: Racing Collection - Reducing Temple Opening
Racing Collection – Reducing temple opening 1. Open temple fully 2. Support lens mount firmly with mounting pliers and blue tip 3. Press temple inward applying pressure at hinge pivot with fore finger... -
Page 6: Racing Collection - Temple Contouring
Racing Collection – Temple Contouring Use large curves to adjust the temple to fit the head... -
Page 7: Racing Collection - Temple End Adjustment
Racing Collection – Temple end adjustment Adjust the temple to the ear shape using large curves Do not put pressure on temple tip when adjusting temple end! -
Page 8: Racing Collection - Temple Shortening
Racing Collection – Temple shortening Straighten temple end and pull temple cover off... - Page 9 Racing Collection – Temple shortening 1. Shorten titanium wire with metal diagonal cutter 2. File sharp edges and burrs to ensure temple tip can be reinstalled properly...
- Page 10 Racing Collection – Temple shortening 1. Squeeze titanium wire with round pliers at the very end to form a small indentation 2. Reinstall temple cover...
-
Page 11: Racing Collection - Temple Removal
Racing Collection – Temple removal 1. Place the red multi-tool as close to the hinge as possible 2. Close hinge to rest on the red multi-tool as shown 3. Place pressure on temple directly behind the red multi-tool until the temple snaps out of the hinge... -
Page 12: Racing Collection - Replacing Temple
Racing Collection – Replacing temple Align the temple with the metal hinge element and press in with your thumb...
Need help?
Do you have a question about the Racing Series and is the answer not in the manual?
Questions and answers