Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Silhouette SPX Signia Carbon
Summary of Contents for Silhouette SPX Signia Carbon
- Page 1 Technical Instructions -SPX Signia Carbon...
- Page 2 Glazing I SPX Signia Carbon Frame is made with 5.0 base curve. Other base curves can be used and will require bridge adjustment for proper lens alignment. Use Silhouette mounting plier with purple fitting and BLS 58/98/97 sleeves for glazing.
- Page 3 Inclination| SPX Signia Carbon Open temple fully. Grasp temple edge firmly and adjust inclination of end piece into required Hold lens fixation firmly with mounting pliers. position.
- Page 4 Adjust temple opening | SPX Signia Carbon Reduce Enlarge...
- Page 5 Temple assembly |SPX Signia Carbon Position titanium end piece at temple. • Cover edge of table or bench with cloth to protect end piece. • Press temple into titanium end piece. •...
- Page 6 Temple adjustment| SPX Signia Carbon Metal inlay Adjustment without heating is possible due to metal inlay surrounded by SPX. Do not bend the temple in areas without the metal inlay.
Need help?
Do you have a question about the SPX Signia Carbon and is the answer not in the manual?
Questions and answers