Fig. 6-2: Board List Under Addireg - Addi-Data ADDICOM APCI-7300 Technical Description

APCI-7xxx
Buttons:
Edit:
Selection of the highlighted board with the different parameters set in the
text boxes.
Insert:
When you want to insert a new board, click on "Insert". The following
dialog window appears:
All boards you can register are listed on the left. Select the wished board.
(The corresponding line is highlighted).
On the right you can read technical information about the board(s).
Activate with "OK"; You come back to the former screen.
Clear:
You can delete the registration of a board. Select the board to be deleted and
click on "Clear".
Set:
Sets the parametered board configuration. The configuration should be set
before you save it.
Cancel:
Reactivates the former parameters of the saved configuration.
Default:
Sets the standard parameters of the board.
More information (not available for the boards with ADDIPACK)
You can change the board specific parameters like the identifier string, the COM
number, the operating mode of a communication board, etc... (See 6.1.1)
If your board does not support these information, you cannot activate this button.

Fig. 6-2: Board list under ADDIREG

Software
25