Storage And Transportation - YASKAWA S-V Series Safety Precautions

Storage and Transportation

• Do not store or install the product in the following places.
• Locations subject to direct sunlight.
• Locations subject to temperatures outside the range specified in the
storage/installation temperature conditions.
• Locations subject to humidity outside the range specified in the stor-
age/installation humidity conditions.
• Locations subject to condensation as the result of extreme changes in
temperature.
• Locations subject to corrosive or flammable gases.
• Locations subject to dust, salts, or iron dust.
• Locations subject to exposure to water, oil, or chemicals.
• Locations subject to shock or vibration.
Failure to observe this caution may result in fire, electric shock, or dam-
age to the product.
• Do not hold the product by the cables, motor shaft, or detector
while transporting it.
Failure to observe this caution may result in injury or malfunction.
• Do not place any load exceeding the limit specified on the pack-
ing box.
Failure to observe this caution may result in injury or malfunction.
• If disinfectants or insecticides must be used to treat packing
materials such as wooden frames, pallets, or plywood, the pack-
ing materials must be treated before the product is packaged,
and methods other than fumigation must be used.
Example: Heat treatment, where materials are kiln-dried to a
core temperature of 56°C for 30 minutes or more.
If the electronic products, which include stand-alone products and prod-
ucts installed in machines, are packed with fumigated wooden materi-
als, the electrical components may be greatly damaged by the gases or
fumes resulting from the fumigation process. In particular, disinfectants
containing halogen, which includes chlorine, fluorine, bromine, or
iodine can contribute to the erosion of the capacitors.
CAUTION
E-5