Table of Contents
Advertisement
Quick Links
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
Artisan Technology Group
new and certified-used/pre-owned equipment
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
View
Instra
REMOTE INSPECTION
SM
Remotely inspect equipment before purchasing with
www.instraview.com
our interactive website at
Contact us:
(888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
is your source for quality
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
LOOKING FOR MORE INFORMATION?
Visit us on the web at
information on price quotations, drivers, technical
specifications, manuals, and documentation
www.artisantg.com
for more
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Congatec COM Express conga-TS87 Series
Summary of Contents for Congatec COM Express conga-TS87 Series
- Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
- Page 2 COM Express™ conga-TS87 4th Generation Intel Core™ i7, i5, i3 processor with QM87 or HM86 PCH ® User’s Guide Revision 1.3 Copyright © 2014 congatec AG TS87m13 1/124...
- Page 3 • Deleted the variant with PN:046809 from sections 1 “Introduction”, 2 ”Feature List” and 2.5 “Power Consumption”. This variant is not on congatec’s roadmap. Added additional two variants with part numbers 046810 and 046811 • Updated section 2.5 “Power Consumption”...
- Page 4 In no event shall congatec AG be liable for any incidental, consequential, special, or exemplary damages, whether based on tort, contract or otherwise, arising out of or in connection with this user’s guide or any other information...
- Page 5 Copyright © 2014, congatec AG. All rights reserved. All text, pictures and graphics are protected by copyrights. No copying is permitted without written permission from congatec AG. congatec AG has made every attempt to ensure that the information in this document is accurate yet the information contained within is supplied “as-is”.
- Page 6 (c) arising from course of performance, course of dealing, or usage of trade. congatec AG shall in no event be liable to the end user for collateral or consequential damages of any kind. congatec shall not otherwise be liable for loss, damage or expense directly or indirectly arising from the use of the product or from any other cause.
- Page 7 Technical Support congatec AG technicians and engineers are committed to providing the best possible technical support for our customers so that our products can be easily used and implemented. We request that you first visit our website at www.congatec.com for the latest documentation, utilities and drivers, which have been made available to assist you.
-
Page 8: Table Of Contents
® Supply Voltage Battery Power ..........19 Additional Features ..............39 2.6.1 CMOS Battery Power Consumption ........20 congatec Board Controller (cBC) ..........39 Environmental Specifications ........... 20 Board Information ..............39 Block Diagram ................21 Watchdog ................39 C Bus ..................39 Cooling Solution .............. - Page 9 11.6.1 Boot Settings Configuration ..........116 11.2 Setup Menu and Navigation ............ 79 11.6.1.1 CSM & Option ROM Control Submenu ......... 118 11.3 Main Setup Screen ..............80 11.7 Security Setup ................ 119 Copyright © 2014 congatec AG TS87m13 8/124...
- Page 10 Hard Disk Security Features ........... 121 11.8 Save & Exit Menu ..............122 Additional BIOS Features ............123 12.1 Supported Flash Devices ............123 12.2 Updating the BIOS ..............123 Industry Specifications ............124 Copyright © 2014 congatec AG TS87m13 9/124...
- Page 11 Power and GND Signal Descriptions ........71 Table 30 Connector C-D Pinout ............. 72 Table 31 Boot Strap Signal Descriptions ..........74 Table 32 PCI Configuration Space Map ..........76 Table 33 PCI Interrupt Routing Map ............77 Copyright © 2014 congatec AG TS87m13 10/124...
-
Page 12: Introduction
This versatility allows the designer to create a dense and optimized package, which results in a more reliable product while simplifying system integration. Most importantly, COM Express™ Copyright © 2014 congatec AG TS87m13... -
Page 13: Options Information
2000E Intel ® Celeron ® 2002E 2.2 GHz Dual Core™ 1.5 GHz Dual Core™ Intel Smart Cache 2 MByte 2 MByte ® Graphics LVDS DisplayPort (DP) HDMI Processor TDP 37 W 25 W Copyright © 2014 congatec AG TS87m13 12/124... -
Page 14: Specifications
2x UART (Rev. B.0 and later) GPIOs 2x ExpressCard BIOS AMI Aptio UEFI 4.x firmware, 8/16 MByte serial SPI with congatec Embedded BIOS features. ® Power ACPI 4.0 compliant with battery support. Also supports Suspend to RAM (S3) and Intel AMT 9.0. Configurable TDP... -
Page 15: Supported Operating Systems
• Height approximately 18 or 21mm (including heatspreader) depending on the carrier board connector that is used. If the 5mm (height) carrier board connector is used, then approximate overall height is 18mm. If the 8mm (height) carrier board connector is used, then approximate overall height is 21mm. Copyright © 2014 congatec AG TS87m13 14/124... -
Page 16: Supply Voltage Standard Power
The input voltages shall rise from 10% of nominal to 90% of nominal at a minimum slope of 250V/s. The smooth turn-on requires that, during the 10% to 90% portion of the rise time, the slope of the turn-on waveform must be positive. Copyright © 2014 congatec AG TS87m13... -
Page 17: Power Consumption
• 100% CPU workload at approximately 100°C peak power consumption (power plan = Balanced) • Suspend to RAM. Supply power for S3 mode is 5V. Note A software tool was used to stress the CPU to Max Turbo Frequency. Copyright © 2014 congatec AG TS87m13 16/124... -
Page 18: Intel ® Core™ I7-4700Eq 2.4 Ghz Quad Core™ 6Mb Cache
2.3 A/28.0 W (12V) 100% CPU and GPU without turbo mode 2.3 A/27.2 W (12V) 100% CPU and GPU with turbo mode 2.9 A/34.2 W (12V) Peak Power Consumption 3.4 A/40.5 W (12V) Copyright © 2014 congatec AG TS87m13 17/124... -
Page 19: Intel ® Core™ I5-4400E 2.7 Ghz Dual Core™ 3Mb Cache
2.1 A/25.3 W (12V) 100% Workload with turbo mode 100% CPU and GPU without turbo mode 3.4 A/40.8 W (12V) 100% CPU and GPU with turbo mode N.A Peak Power Consumption 3.6 A/42.7 W (12V) Copyright © 2014 congatec AG TS87m13 18/124... -
Page 20: Intel ® Celeron ® 2000E 2.2 Ghz Dual Core™ 2Mb Cache
100% CPU and GPU without turbo mode 1.50 A/18.0 W (12V) 100% CPU and GPU with turbo mode N.A Peak Power Consumption Supply Voltage Battery Power • 2.0V-3.5V DC • Typical 3V DC Copyright © 2014 congatec AG TS87m13 19/124... -
Page 21: Cmos Battery Power Consumption
Storage: 5% to 95% Caution The above operating temperatures must be strictly adhered to at all times. When using a congatec heatspreader, the maximum operating temperature refers to any measurable spot on the heatspreader’s surface. Humidity specifications are for non-condensing conditions. -
Page 22: Block Diagram
LPC Bus GPIOs congatec custom Board Controller SATA Port 0 SATA Port 1 SATA0 - SATA3 SATA USB 2.0 USB 3.0 SATA Port 2 SATA Port 3 Monitoring I2C Bus GPIOs LID#/SLEEP# FAN control Copyright © 2014 congatec AG TS87m13 21/124... -
Page 23: Cooling Solution
Cooling Solution congatec AG offers three cooling solutions for the conga-TS87: • Active cooling solution (CSA) • Passive cooling solution (CSP) • Heatspreader The dimensions of the cooling solutions are shown below and all measurements are in millimeter. The maximum torque specification for heatspreader screws is 0.3 Nm. -
Page 24: Csp Dimensions
CSP Dimensions M2.5x11mm threaded standoff for threaded version 2.7x11mm non-thread standoff for bore hole version Copyright © 2014 congatec AG TS87m13 23/124... -
Page 25: Heatspreader
M2.5x11mm threaded standoff for threaded version 2.7x11mm non-thread standoff for bore hole version Copyright © 2014 congatec AG TS87m13 24/124... - Page 26 The gap pad material used on all heatspreaders contains silicon oil that can seep out over time depending on the environmental conditions it is subjected to. For more information about this subject, contact your local congatec sales representative and request the gap pad material manufacturer’s specification.
-
Page 27: Onboard Temperature Sensors
The board sensor (T12) is located at the top of the conga-TS87. This sensor measures the board temperature and is defined in CGOS API as CGOS_TEMP_BOARD. It is located on the module as shown below: Sensor Location DDR3 RVS 1.5V Copyright © 2014 congatec AG TS87m13 26/124... - Page 28 The system environment sensor is located at the bottom of the conga-TS87. This sensor measures the system environment temperature and is defined in CGOS API as CGOS_TEMP_ENV. It is located on the module as shown below: Sensor Location Copyright © 2014 congatec AG TS87m13 27/124...
-
Page 29: Connector Subsystems Rows A, B, C, D
(Routed to DDI interface at I²C Bus Fast Mode connector) VGA (CRT) 3x DVI LVDS/eDP (Routed to DDI interface at 2x UART (Rev. B.0 & later) connector) GPIOs Power Control Power Management Fan Control top view Copyright © 2014 congatec AG TS87m13 28/124... -
Page 30: Primary Connector Rows A And B
GBE0_MD0± to GBE0_MD3± plus control signals for link activity indicators. These signals can be used to connect to a 10/100/1000 BaseT RJ45 connector with integrated or external isolation magnetics on the carrier board. Copyright © 2014 congatec AG TS87m13... -
Page 31: Lpc Bus
ULP feature is enabled by default and cannot be disabled. In newer driver version, this feature can be disabled. To have the correct LED status, congatec recommends that you use the latest i218 device driver provided on the website and additionally disable the ULP mode. -
Page 32: Expresscard
The conga-TS87 offers an LVDS interface with optional eDP overlay on the AB connector. The LVDS/eDP interface is by default configured to provide LVDS signals. The interface can optionally support eDP (assembly option). For more information, contact congatec technical center. -
Page 33: Power Control
A sample screenshot is shown below: Note The module is kept in reset as long as the PWR_OK is driven by carrier board hardware. Copyright © 2014 congatec AG TS87m13 32/124... - Page 34 0.8V when the 12V is applied to the module. Actively driving PWR_OK high is compliant to the COM Express specification but this can cause back driving. Therefore, congatec recommends driving the PWR_OK low to keep the module in reset and tri-state PWR_OK when the carrier board hardware is ready to boot.
-
Page 35: Power Management
25 figure 7 of the document “ATX12V Power Supply Design Guide V2.2”. 6.1.13 Power Management ACPI 3.0 compliant with battery support. Also supports Suspend to RAM (S3). Copyright © 2014 congatec AG TS87m13 34/124... -
Page 36: Secondary Connector Rows C And D
LANE LANE LANE LANE LANE LANE LANE Single Link (1x16 Link) Link 1 Double Links (2x8 Links) Link 1 Link 2 Triple Links (1x8 + 2x4 Links) Link 1 Link 2 Link 3 Copyright © 2014 congatec AG TS87m13 35/124... -
Page 37: Digital Display Interface
3840x2160 @60Hz 4096x2304 @24Hz eDP: 3840x2160 @60Hz 2560x1600 @60Hz LVDS/eDP LVDS:1920x1200@60Hz 3840x2160 @60Hz 3840x2160 @60Hz eDP: 3840x2160 @60Hz LVDS/eDP HDMI HDMI LVDS:1920x1200@60Hz 4096x2304 @24Hz 4096x2304 @24Hz eDP: 3840x2160 @60Hz 2560x1600 @60Hz 2560x1600 @60Hz Copyright © 2014 congatec AG TS87m13 36/124... -
Page 38: Hdmi
See section 9.5 of this document for more information about enabling DisplayPort peripherals. Note The DisplayPort supports 3 independent displays. See table 2 above for possible display combinations. Copyright © 2014 congatec AG TS87m13 37/124... -
Page 39: Usb 3.0
5 Gb/s and supports SuperSpeed, high-speed, full-speed and low-speed traffic. Note The xHCI controller does not support USB debug port. If you desire USB debug port functionality, use the EHCI based debug port. Copyright © 2014 congatec AG TS87m13 38/124... -
Page 40: Additional Features
The conga-TS87 is equipped with a STMicroelectronics STM32 microcontroller. This onboard microcontroller plays an important role for most of the congatec embedded/industrial PC features. It fully isolates some of the embedded features such as system monitoring or the I²C bus from the x86 core architecture, which results in higher embedded feature performance and more reliability, even when the x86 processor is in a low power mode. -
Page 41: Oem Bios Customization
OEM POST Logo This feature allows system designers to replace the congatec POST logo displayed in the upper left corner of the screen during BIOS POST with their own BIOS POST logo. Use the congatec system utility CGUTIL 1.5.4 or later to replace/add the OEM POST logo. -
Page 42: Oem Dxe Driver
The architecture of the CGOS API driver provides the ability to write application software that runs unmodified on all congatec CPU modules. All the hardware related code is contained within the congatec embedded BIOS on the module. See section 1.1 of the CGOS API software developers guide, which is available on the congatec website . -
Page 43: Security Features
RSA algorithms with key lengths up to 2,048 bits as well as a real random number generator. Security sensitive applications like gaming and e-commerce will benefit also with improved authentication, integrity and confidence levels. 7.10 Suspend to Ram The Suspend to RAM feature is available on the conga-TS87. Copyright © 2014 congatec AG TS87m13 42/124... -
Page 44: Conga Tech Notes
Smart Response Technology is a disk caching solution that can provide improved computer system performance with improved power savings. It allows configuration of a computer systems with the advantage of having HDDs for maximum storage capacity with system performance at or near SSD performance levels. Copyright © 2014 congatec AG TS87m13 43/124... -
Page 45: Intel ® Rapid Start Technology
Only conga-TS87 module variants that feature the Core™ i7 and i5 processors support Intel Turbo Boost 2 Technology. Refer to the power ® consumption tables in section 2.5 of this document for information about the maximum turbo frequency available for each variant of the conga-TS87. Copyright © 2014 congatec AG TS87m13 44/124... -
Page 46: Thermal Monitor And Catastrophic Thermal Protection
The Windows family of operating systems links its processor performance control policy to the power scheme setting. You must ensure that the power scheme setting you choose has the ability to support Enhanced Intel SpeedStep technology. ® ® Copyright © 2014 congatec AG TS87m13 45/124... -
Page 47: Intel ® 64 Architecture
• 64-bit pointers • 64-bit wide general purpose registers • 64-bit integer support • Up to one Terabyte (TB) of platform address space You can find more information about Intel 64 Technology at: http://developer.intel.com/technology/intel64/index.htm ® Copyright © 2014 congatec AG TS87m13 46/124... -
Page 48: Intel ® Virtualization Technology
VT-x) added hardware support in the processor to improve the virtualization performance and robustness. Note congatec does not offer virtual machine monitor (VMM) software. All VMM software support questions and queries should be directed to the VMM software vendor and not congatec technical support. -
Page 49: Acpi Suspend Modes And Resume Events
Note The usage of DDR3@1.5V SO-DIUM modules may affect the stability or boot-up of the conga-TS87. Therefore use only non-ECC, unbuffered DDR3L SO-DIMM memory modules up to 1600 MT/s on the conga-TS87. Copyright © 2014 congatec AG TS87m13 48/124... -
Page 50: Usb 2.0 Ehci Host Controller Support
Ports 6-7 and 10-13 Not supported on the conga-TS87 COM Express Port: Port 0 Port 1 Port 2 Port 3 Port 4 Port 5 Unused Unused Port 6 Port 7 Unused Unused Unused Unused Copyright © 2014 congatec AG TS87m13 49/124... -
Page 51: Signal Descriptions And Pinout Tables
Signal Descriptions and Pinout Tables The following section describes the signals found on COM Express™ Type VI connectors used for congatec AG modules. The pinout of the modules complies with COM Express Type 6 Rev. 2.1. Table 3 describes the terminology used in this section for the Signal Description tables. The PU/PD column indicates if a COM Express™... -
Page 52: A-B Connector Signal Descriptions
High Definition Audio. ® Note Some signals have special functionality during the reset process. They may bootstrap some basic important functions of the module. For more information refer to section 9.5 of this user’s guide. Copyright © 2014 congatec AG TS87m13 51/124... -
Page 53: Table 6 Gigabit Ethernet Signal Descriptions
Serial ATA channel 1, Receive Input differential pair. I SATA Supports Serial ATA specification, Revision 3.0 SATA1_RX- SATA1_TX+ Serial ATA channel 1, Transmit Output differential pair. O SATA Supports Serial ATA specification, Revision 3.0 SATA1_TX- Copyright © 2014 congatec AG TS87m13 52/124... -
Page 54: Table 8 Pci Express Signal Descriptions (General Purpose)
PCI Express channel 5, Receive Input differential pair. I PCIE Supports PCI Express Base Specification, Revision 2.0 PCIE_RX5- PCIE_TX5+ PCI Express channel 5, Transmit Output differential pair. O PCIE Supports PCI Express Base Specification, Revision 2.0 PCIE_TX5- Copyright © 2014 congatec AG TS87m13 53/124... -
Page 55: Table 9 Expresscard Support Pins Signal Descriptions
USB 2.0 compliant. Backwards compatible to USB 1.1 USB3- USB Port 3, data - or D- USB 2.0 compliant. Backwards compatible to USB 1.1 USB4+ USB Port 4, data + or D+ USB 2.0 compliant. Backwards compatible to USB 1.1 Copyright © 2014 congatec AG TS87m13 54/124... -
Page 56: Table 12 Crt Signal Descriptions
Vertical sync output to VGA monitor VGA_I2C_CK I/O OD 5V DDC clock line (I²C port dedicated to identify VGA monitor capabilities) PU 2k2 3.3V I/O OD 5V VGA_I2C_DAT B96 DDC data line. PU 2k2 3.3V Copyright © 2014 congatec AG TS87m13 55/124... -
Page 57: Table 13 Lvds Signal Descriptions
Embedded DisplayPort Signal Descriptions Signal Pin # Description PU/PD Comment eDP_TX3+ eDP differential pairs. AC coupled off eDP_TX2 and eDP_TX3 pairs are not supported on eDP_TX3- module. conga-TS87. eDP_TX2+ eDP_TX2- eDP_TX1+ eDP_TX1- eDP_TX0+ eDP_TX0- Copyright © 2014 congatec AG TS87m13 56/124... -
Page 58: Table 15 Spi Bios Flash Interface Signal Descriptions
Output for audio enunciator, the “speaker” in PC-AT systems O 3.3V SPEAKER is a boot strap signal (see note below) Output indicating that a watchdog time-out event has occurred. O 3.3V PD 10K Copyright © 2014 congatec AG TS87m13 57/124... -
Page 59: Table 17 General Purpose I/O Signal Descriptions
Shared with SD_DATA2. Bidirectional signal GPI3 General purpose input pins. Pulled high internally on the module. I 3.3V PU 10K 3.3V SDIO interface is not supported on the conga-TS87 Shared with SD_DATA3. Bidirectional signal. Copyright © 2014 congatec AG TS87m13 58/124... -
Page 60: Table 18 Power And System Management Signal Descriptions
Sleep button. Used by the ACPI operating system to bring the system to sleep state or to wake I OD 3.3V PU 10k 3.3VSB it up again. Table 19 General Purpose Serial Interface Signal Descriptions Copyright © 2014 congatec AG TS87m13 59/124... -
Page 61: Table 20 Power And Gnd Signal Descriptions
All available GND connector pins shall be used and tied to Carrier Board GND plane. A66, A70, A80, A90, A100, A110, B1, B11, B21, B31, B41, B51, B60, B70, B80, B90, B100, B110 Copyright © 2014 congatec AG TS87m13 60/124... -
Page 62: A-B Connector Pinout
SATA2_TX- SATA3_TX- LVDS_A3+ LVDS_B3- SUS_S5# PWR_OK LVDS_A3- eDP/LVDS_BKLT_EN SATA2_RX+ SATA3_RX+ GND (FIXED) GND (FIXED) SATA2_RX- SATA3_RX- eDP_TX3+/LVDS_A_CK+ LVDS_B_CK+ BATLOW# eDP_TX3-/LVDS_A_CK- LVDS_B_CK- (S)ATA_ACT# AC/HDA_SDIN2 eDP_AUX+/LVDS_I2C_CK eDP/LVDS_BKLT_CTRL AC/HDA_SYNC AC/HDA_SDIN1 eDP_AUX-/LVDS_I2C_DAT VCC_5V_SBY AC/HDA_RST# AC/HDA_SDIN0 GPI3 VCC_5V_SBY Copyright © 2014 congatec AG TS87m13 61/124... - Page 63 A108 VCC_12V B108 VCC_12V GPI0 GPO1 A109 VCC_12V B109 VCC_12V PCIE_TX4+ PCIE_RX4+ A110 GND (FIXED) B110 GND (FIXED) Note The signals marked with asterisk symbol (*) are not supported on the conga TS87. Copyright © 2014 congatec AG TS87m13 62/124...
-
Page 64: C-D Connector Signal Descriptions
Additional receive signal differential pairs for the Superspeed USB data path I USB_SSRX3- USB_SSTX3+ Additional transmit signal differential pairs for the Superspeed USB data path USB_SSTX3- Table 24 PCI Express Signal Descriptions (x16 Graphics) Copyright © 2014 congatec AG TS87m13 63/124... - Page 65 PCIE_RX[16-31] + and -. PEG_RX1+ PEG_RX1- PEG_RX2+ PEG_RX2- PEG_RX3+ PEG_RX3- PEG_RX4+ PEG_RX4- PEG_RX5+ PEG_RX5- PEG_RX6+ PEG_RX6- PEG_RX7+ PEG_RX7- PEG_RX8+ PEG_RX8- PEG_RX9+ PEG_RX9- PEG_RX10+ PEG_RX10- PEG_RX11+ PEG_RX11- PEG_RX12+ PEG_RX12- PEG_RX13+ PEG_RX13- PEG_RX14+ PEG_RX14- PEG_RX15+ C101 PEG_RX15- C102 Copyright © 2014 congatec AG TS87m13 64/124...
- Page 66 Dedicated PEG Channels are provided in Type 6. SDVO is no longer multiplexed on the PEG port. Some signals have special functionality during the reset process. They may bootstrap some basic important functions of the module. For more information refer to section 9.5 of this user’s guide. Copyright © 2014 congatec AG TS87m13 65/124...
-
Page 67: Table 25 Ddi Signal Description
Multiplexed with DP2_LANE2+ and TMDS2_DATA0+. O PCIE DDI2_PAIR2- Multiplexed with DP2_LANE2- and TMDS2_DATA0-. DDI2_PAIR3+ Multiplexed with DP2_LANE3+ and TMDS2_CLK+. O PCIE DDI2_PAIR3- Multiplexed with DP2_LANE3- and TMDS2_CLK-. DDI2_HPD Multiplexed with DP2_HPD and HDMI2_HPD. I 3.3V PD 1M Copyright © 2014 congatec AG TS87m13 66/124... - Page 68 AUX pair contains the CTRLCLK and CTRLDATA signals Note Some signals have special functionality during the reset process. They may bootstrap some basic important functions of the module. For more information refer to section 9.5 of this user’s guide. Copyright © 2014 congatec AG TS87m13 67/124...
-
Page 69: Table 26 Hdmi Signal Descriptions
HDMI enable strap is already populated. TMDS3_CLK + HDMI/DVI TMDS Clock output differential pair.. O PCIE TMDS3_CLK - Multiplexed with DDI3_PAIR3+ and DDI3_PAIR3-. TMDS3_DATA0+ HDMI/DVI TMDS differential pair. O PCIE TMDS3_DATA0- Multiplexed with DDI3_PAIR2+ and DDI3_PAIR2-. Copyright © 2014 congatec AG TS87m13 68/124... -
Page 70: Table 27 Displayport (Dp) Signal Descriptions
Half-duplex bi-directional AUX channel for services such as link PU 100k DP1_AUX- is a boot strap signal (see note below). configuration or maintenance and EDID access. PCIE 3.3V DP enable strap is already populated. Copyright © 2014 congatec AG TS87m13 69/124... - Page 71 DP enable strap already populated. Note Some signals have special functionality during the reset process. They may bootstrap some basic important functions of the module. For more information refer to section 9.5 of this user’s guide. Copyright © 2014 congatec AG TS87m13 70/124...
-
Page 72: Table 28 Module Type Definition Signal Description
C84, C87, C90, C93, C96, C100, plane. C103, C110, D1, D2, D5, D8, D11, D14, D21, D31, D41, D51, D60, D67, D70, D73, D76, D80, D84, D87, D90, D93, D96, D100, D103, D110 Copyright © 2014 congatec AG TS87m13 71/124... -
Page 73: C-D Connector Pinout
PCIE_RX7- (*) PCIE_TX7- (*) PEG_RX8+ PEG_TX8+ DDI1_HPD RSVD PEG_RX8- PEG_TX8- DDI1_PAIR4+ RSVD GND (FIXED) GND (FIXED) DDI1_PAIR4- DDI1_PAIR0+ PEG_RX9+ PEG_TX9+ RSVD DDI1_PAIR0- PEG_RX9- PEG_TX9- RSVD RSVD RSVD RSVD DDI1_PAIR5+ DDI1_PAIR1+ DDI1_PAIR5- DDI1_PAIR1- PEG_RX10+ PEG_TX10+ Copyright © 2014 congatec AG TS87m13 72/124... - Page 74 D107 VCC_12V PEG_RX0- PEG_TX0- C108 VCC_12V D108 VCC_12V TYPE0# PEG_LANE_RV# C109 VCC_12V D109 VCC_12V PEG_RX1+ PEG_TX1+ C110 GND (FIXED) D110 GND (FIXED) Note The signals marked with asterisk symbol (*) are not supported. Copyright © 2014 congatec AG TS87m13 73/124...
-
Page 75: Boot Strap Signals
No external DC loads or external pull-up or pull-down resistors should change the configuration of the signals listed in the above table. External resistors may override the internal strap states and cause the COM Express™ module to malfunction and/ or cause irreparable damage to the module. Copyright © 2014 congatec AG TS87m13 74/124... -
Page 76: System Resources
On the conga-TS87, the PCI Express Bus acts as the subtractive decoding agent. All I/O cycles that are not positively decoded are forwarded to the PCI Bus not the LPC Bus. Only specified I/O ranges are forwarded to the LPC Bus. In the congatec Embedded BIOS, the following I/O address ranges are sent to the LPC Bus: 2Eh –... -
Page 77: Pci Configuration Space Map
Internal Serial ATA Controller 2 Internal Thermal Subsystem 01h (Note3) Internal PEG Port 0 02h (Note3) Internal PEG Port 1 03h (Note3) Internal PEG Port 2 04h (Note3) Internal PCI Express Port 0 Copyright © 2014 congatec AG TS87m13 76/124... -
Page 78: Pci Interrupt Routing Map
LAN SATA1 SATA2 PEG INT Line ¹ Mode Bus + Root Root Root Port 0 Port 1 Port 2 Thermal Port 1 Port 2 Port 3 INTA x ² INTB x ³ INTC INTD Copyright © 2014 congatec AG TS87m13 77/124... -
Page 79: I²C Bus
The COM Express PCIe Port 6 is routed to the PCIe Root Port 7 of the PCH. 10.4 I²C Bus There are no onboard resources connected to the I²C bus. Address 16h is reserved for congatec Battery Management solutions. 10.5 SM Bus... -
Page 80: Bios Setup Description
BIOS setup program 11.2 Setup Menu and Navigation The congatec BIOS setup screen is composed of the menu bar, left frame and right frame. The menu bar is shown below: Main Advanced... -
Page 81: Main Setup Screen
Displays the time the board is running [in hours max. 65535]. ►Platform submenu Opens the Platform Information submenu. Information System Date Day of week, month/ Specifies the current system date day/year Note: The date is in month-day-year format. Copyright © 2014 congatec AG TS87m13 80/124... -
Page 82: Platform Information Submenu
Select the advanced tab from the setup menu to enter the advanced BIOS setup screen. The menu is used for setting advanced features and only features described within this user’s guide are listed. Main Advanced Chipset Boot Security Save & Exit Graphics Watchdog Hardware Health Monitoring Copyright © 2014 congatec AG TS87m13 81/124... -
Page 83: Graphics Submenu
DVMT 5.0 specification. MAX = Use as much graphics memory as possible. Depends on total system memory installed and the operating system used (see DVMT 5.0 specification). Copyright © 2014 congatec AG TS87m13 82/124... - Page 84 Auto detection is performed by reading an EDID data set via the video I²C bus. WVGA 800x480 1x24 (01Bh) The number in brackets specifies the congatec internal number of the respective panel data set. Note: Customized EDID™ utilizes an OEM defined EDID™ data set stored in the BIOS flash device.
- Page 85 Configure graphics output when using the UEFI Graphics Output Protocol (GOP) driver instead of legacy video BIOS. Only visible if GOP driver is configured to be used in the ‘Video Option ROM Launch Policy’ setup node. Copyright © 2014 congatec AG TS87m13 84/124...
-
Page 86: Gop Configuration Submenu
Selects the type of event that will be generated when timeout 1 is reached. For more information about ACPI Event, see note below. Reset Power Button Event 2 Disabled Selects the type of event that will be generated when timeout 2 is reached. ACPI Event Reset Power Button Copyright © 2014 congatec AG TS87m13 85/124... - Page 87 Note In ACPI mode, it is not possible for a “Watchdog ACPI Event” handler to directly restart or shutdown the OS. For this reason the congatec BIOS will do one of the following: For Shutdown: An over temperature notification is executed. This causes the OS to shut down in an orderly fashion.
-
Page 88: Hardware Health Monitoring Submenu
If enabled, the fan will always run at least at the selected minimum speed, even if the control temperature is Speed Enabled below the fan control start temperature. This is to ensure a minimum air flow all the time. Copyright © 2014 congatec AG TS87m13 87/124... -
Page 89: Pci & Pci Express Submenu
►PCI Express Port 4 submenu Opens the PCI Express Port submenu ►PCI Express Port 5 submenu Opens the PCI Express Port submenu ►PCI Express Port 6 submenu Opens the PCI Express Port submenu Copyright © 2014 congatec AG TS87m13 88/124... -
Page 90: Pci Express Settings Submenu
On non-PCI Express aware operating systems some devices may not be re-initialized correctly after S3. Setting this node Disabled to Enabled restores PCI Express configuration on S3 resume. Warning: Enabling this may cause issues with other hardware after S3 resume. Copyright © 2014 congatec AG TS87m13 89/124... -
Page 91: Pirq Routing & Irq Reservation Submenu
Displays the width and the operation mode at which the attached device currently operates on PEG0 port (B0:D1:F0). Some Gen3, Gen2 devices start up in Gen1 mode and their OS driver just sets them to Gen3 or Gen2 mode. Copyright © 2014 congatec AG TS87m13 90/124... - Page 92 Displays the width and the operation mode at which the attached device currently operates on PEG2 port (B0:D1:F2). Some Gen3, Gen2 devices start up in Gen1 mode and their OS driver just sets them to Gen3 or Gen2 mode. Copyright © 2014 congatec AG TS87m13 91/124...
- Page 93 In this submenu, the Endpoint Preset Value for PEG port lanes 0 -15 can be set individually. Value for each Lane ► PEG Gen3 Endpoint Hint submenu In this submenu, the Endpoint Hint Value for PEG port lanes 0 -15 can be set individually. Value for each Lane Copyright © 2014 congatec AG TS87m13 92/124...
-
Page 94: Pci Express Port Submenu
ASPM PCI Express Active State Power Management settings. L0sL1 Auto L1 Substates Disabled PCI Express L1 substates settings. L1.1 L1.2 L1.1 & L1.2 Disabled Enable or disable PCI Express Unsupported Request Reporting. Enabled Copyright © 2014 congatec AG TS87m13 93/124... - Page 95 4-20 Reserved I/O range for this root bridge. Default : 4 PCIe LTR Disabled Enable or disable PCI Express Latency Tolerance Reporting (LTR). Enabled PCIe LTR Lock Disabled PCIe LTR configuration lock. Enabled Copyright © 2014 congatec AG TS87m13 94/124...
-
Page 96: Acpi Submenu
Disabled = The BIOS will control the ASPM support of the PCI Express device. ACPI Debug Disabled Open a memory buffer for storing debug strings. Use method ADBG to write strings to buffer. Enabled Copyright © 2014 congatec AG TS87m13 95/124... -
Page 97: Rtc Wake Submenu
Enable or disable TPM support. System reset is required after change. Enabled TPM State Disabled Enable or disable TPM chip. Enabled Note: System might restart several times during POST to acquire target state. Copyright © 2014 congatec AG TS87m13 96/124... -
Page 98: Cpu Submenu
Range: 8 - 23. This sets the boot ratio. If ratio is out of range, maximum ratio is used. Non-ACPI OSes will use this ratio. Default : 255 The range 8-23 is just an example as the possible range depends on processor variant. Hyper-Threading Disabled Enable or disable Hyper-Threading technology. Enabled Copyright © 2014 congatec AG TS87m13 97/124... - Page 99 CPU Power Limit2 0-255 CPU Power Limit2 value Default : 0 Platform Power Limit Lock Disabled When enabled, PLATFORM_POWER_LIMIT MSR will be locked and a reset will be required to unlock the register. Enabled Copyright © 2014 congatec AG TS87m13 98/124...
- Page 100 C6 Latency Configure Short/Long latency for C6. Long CPU C7 Report Disabled Enable or disable CPU C7 report to OS. CPU C7 CPU C7s C7 Latency Short Configure Short/Long latency for C7. Long Copyright © 2014 congatec AG TS87m13 99/124...
- Page 101 TCC activation will lower CPU core and graphics core frequency, voltage or both. The factory TCC activation temperature is normally 100C. By entering 10 for TCC offset, the TCC will be activated at 90C. Copyright © 2014 congatec AG TS87m13...
-
Page 102: Sata Submenu
3 Gbit/s on SATA port 2 and 3. ► Software Feature Mask submenu RAID option ROM and Intel Rapid Storage Technology driver will refer to the Software Feature Mask Configuration Configuration to enable or disable the storage features. Copyright © 2014 congatec AG TS87m13 101/124... -
Page 103: Software Feature Mask Configuration
RAID volumes are normal. HDD Unlock Disabled If enabled, indicates that the HDD password unlock in the OS is enabled. Enabled LED Locate Disabled LED locate Enabled Copyright © 2014 congatec AG TS87m13 102/124... - Page 104 Enable or disable Intel Smart Response Technology. Enabled Technology Option ROM UI Delay 2 Seconds If enabled, indicates the delay of the option ROM user interface splash screen in a normal status. 4 Seconds 6 Seconds 8 Seconds Copyright © 2014 congatec AG TS87m13 103/124...
-
Page 105: Intel(R) Rapid Start Technology Submenu
Bypass Same as at SATA Port 0. Disk drive name Quiet Acoustic Mode Max Performance SATA Port 3 Bypass Same as at SATA Port 0. Disk drive name Quiet Acoustic Mode Max Performance Copyright © 2014 congatec AG TS87m13 104/124... -
Page 106: Usb Submenu
Route the respective USB2.0 port to EHCI or xHCI controller. Route to xHCI USB2.0 Port 7 Pins Route to EHCI Route the respective USB2.0 port to EHCI or xHCI controller. Route to xHCI Copyright © 2014 congatec AG TS87m13 105/124... - Page 107 Select maximum time a USB device might need before it properly reports itself to the host controller. Selection Manual ‘Auto’ - Selects a default value which is 100ms for a root port or derived from the hub descriptor for a hub port. Copyright © 2014 congatec AG TS87m13 106/124...
-
Page 108: 11.4.12.1 Usb Ports Per-Port Disable Control Submenu
Disabled Enable or disable the respective USB2.0 port. Enabled USB Port 6 Disabled Enable or disable the respective USB2.0 port. Enabled USB Port 7 Disabled Enable or disable the respective USB2.0 port. Enabled Copyright © 2014 congatec AG TS87m13 107/124... -
Page 109: Smart Settings Submenu
Enable or disable parallel port. Enabled Device Settings IO=378h; IRQ=7; Fixed configuration of the parallel port if enabled. Device Mode Standard Parallel Mode Set the parallel port mode. EPP Mode ECP Mode EPP Mode & ECP Mode Copyright © 2014 congatec AG TS87m13 108/124... -
Page 110: Serial Port Console Redirection Submenu
Select baud rate. 57600, 115200 Data Bits Set number of data bits. Parity None Select parity. Even Mark Space Stop Bits Set number of stop bits. None Flow Control Select flow control. Hardware RTS/CTS Copyright © 2014 congatec AG TS87m13 109/124... -
Page 111: Uefi Network Stack Submenu
UEFI Driver No option Displays the UEFI Driver version. Adapter PBA No option Displays the Adapter PBA. Chip Type No option Displays the type of the Chip in which the Ethernet controller is integrated. Copyright © 2014 congatec AG TS87m13 110/124... -
Page 112: Nic Configuration Submenu
Specifies the port speed used for the selected boot protocol. 10 Mbps Half 10 Mbps Full 100 Mbps Half 100 Mbps Full Wake On LAN Disabled Enables the server to be powered on using an in-band magic packet. Enabled Copyright © 2014 congatec AG TS87m13 111/124... -
Page 113: Chipset Setup
PCH LAN Controller Enabled Enable or disable the onboard, PCH integrated ethernet Disabled controller. Wake on LAN Enabled Enable or disable the wake on LAN capability of the onboard, PCH integrated ethernet controller. Disabled Copyright © 2014 congatec AG TS87m13 112/124... -
Page 114: Processor (Integrated Components) Submenu
DMI link is the main, but exclusively internal bus between the Processor and Platform Controller Hub (PCH). ►Memory Configuration submenu Memory configuration parameters ►GT - Power Management submenu Processor Graphics Controller (GT) power management control options Control Copyright © 2014 congatec AG TS87m13 113/124... -
Page 115: Dmi Configuration Submenu
CAS to RAS (tRCDmin) No option Displays the CAS to RAS (tRCDmin). Row Precharge (tRPmin) No option Displays the Row Precharge (tRPmin). Active to Precharge No option Displays the Active to Precharge (tRASmin). (tRASmin) Copyright © 2014 congatec AG TS87m13 114/124... - Page 116 Select DIMM timing profile that should be used. XMP profiles cannot work on current modules Custom profile and MUSTnot be selected. XMP Profile 1 CAUTION: For congatec internal debugging only. DO NOT CHANGE. XMP Profile 2 ►Custom Profile Control Submenu Configure the custom DIMM profile options.
-
Page 117: Gt - Power Management Control Submenu
Note: The default OEM logo is a dark screen. Setup Prompt Timeout Number of seconds to wait for setup activation key. 0 - 65535 0 means no wait for fastest boot (not recommended), 65535 means infinite wait. Copyright © 2014 congatec AG TS87m13 116/124... - Page 118 Control UEFI Fast Boot Disabled Enable or disable boot with initialization of a minimal set of devices required to launch active boot option. Has Enabled no effect for BBS / legacy boot options. Copyright © 2014 congatec AG TS87m13 117/124...
-
Page 119: Csm & Option Rom Control Submenu
Note 1. The term ‘AC power loss’ stands for the state when the module looses the standby voltage on the 5V_SB pins. On congatec modules, the standby voltage is continuously monitored after the system is turned off. If within 30 seconds the standby voltage is no longer detected, then this is considered an AC power loss condition. -
Page 120: Security Setup
BIOS reaction on INT19 trapping by Option ROM Postponed Immediate: Execute the trap right away. Postponed: Execute the trap during legacy boot. 11.7 Security Setup Select the Security tab from the setup menu to enter the Security setup screen. Copyright © 2014 congatec AG TS87m13 119/124... -
Page 121: Security Settings
Use cgutlcmd.exe version 1.5.3 or later. Built in BIOS recovery is disabled in the congatec BIOS firmware to prevent the BIOS from updating itself due to the user pressing a special key combination or a corrupt BIOS being detected. congatec considers such a recovery update a security risk because the BIOS internal update process bypasses the implemented BIOS security explained above. -
Page 122: Hard Disk Security Features
Only the congatec utility interface to the SMI handler of the BIOS flash update is enabled. Other interfaces to the SMI handler are disabled to prevent non congatec tools from writing to the BIOS flash. As a result of this restriction, flash utilities supplied by AMI or Intel will not work . -
Page 123: Save & Exit Menu
List of all boot devices currently Select device to leave setup menu and boot from the selected device. Only visible and active if Boot Priority detected. Selection setup node is set to “Device Based”. Copyright © 2014 congatec AG TS87m13 122/124... -
Page 124: Additional Bios Features
Additional BIOS Features The conga-TS87 uses a congatec/AMI AptioEFI that is stored in an onboard Flash Rom chip and can be updated using the congatec System Utility (version 1.5.0 and later), which is available in a DOS based command line, Win32 command line, Win32 GUI, and Linux version. -
Page 125: Industry Specifications
Industry Specifications The list below provides links to industry specifications that apply to congatec AG modules. Specification Link Low Pin Count Interface Specification, Revision 1.0 (LPC) http://developer.intel.com/design/chipsets/industry/lpc.htm Universal Serial Bus (USB) Specification, Revision 2.0 http://www.usb.org/home PCI Specification, Revision 2.3 http://www.pcisig.com/specifications Serial ATA Specification, Revision 3.0... - Page 126 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
Need help?
Do you have a question about the COM Express conga-TS87 Series and is the answer not in the manual?
Questions and answers