Sony HANDYCAM VISION TRV208E Operating Instructions Manual page 59

Using the fader function
MONOTONE
When fading in, the picture gradually changes
from black-and-white to colour.
When fading out, the picture gradually changes
from colour to black-and-white.
(1) When fading in [a]
In the standby mode, press FADER until the
desired fader indicator flashes.
When fading out [b]
In the recording mode, press FADER until the
desired fader indicator flashes.
The indicator changes as follows:
t FADER t M.FADER t STRIPE*
no indicator
R
DOT* 2) * 3)
R
2) 3)
WIPE* * T OVERLAP*
The last selected fader mode is indicated first
of all.
(2) Press START/STOP. The fader indicator stops
flashing.
After the fade in/out is carried out, your
camcorder automatically returns to the
normal mode.
To cancel the fader function
Before pressing START/STOP, press FADER
until the indicator disappears.
* 1) CCD-TRV107E/TRV108E/TRV208E/TRV408E
only
* 2) Fade in only
* 3) DCR-TRV140E only
(1)
1)
r
2)
BOUNCE*
r
MONOTONE
2) 3)
* T
DOT*
(2)
* 1)
* 2)
3)
*
t FADER t M.FADER t STRIPE*
R
2) 3)
*
R
2) 3)
WIPE* * T OVERLAP*
1
FADER
FADER
[a]
[b]
1)
r
BOUNCE* 2)
r
MONOTONE
2) 3)
* T
59