Sony HANDYCAM VISION TRV208E Operating Instructions Manual page 132

Viewing images using your computer
– USB Streaming (Windows users only)
Capturing moving images
(1) Select
.
(2) Click at the start point to capture and
click at the stop point to capture using
the preview window. The captured image
appears on the thumbnail list window.
Notes
•When you view images using your computer
with the USB connection, the following
conditions may occur, but do not indicate
malfunction:
– The image may fluctuate.
– The image may contain noise, etc.
– The image does not appear properly if the
image signal is of a different TV colour system
from your camcorder.
•When your camcorder is in the standby mode
with a cassette inserted, it turns off
automatically after 3 minutes.
•We recommend setting DEMO MODE to OFF
in the menu settings when your camcorder is in
the standby mode, and no cassette is inserted.
•Indicators in the camcorder LCD screen do not
appear on images that are captured into your
computer.
If image data cannot be transferred by the
USB connection
The USB driver has been registered incorrectly as
your computer was connected to your camcorder
before installing the USB driver. Perform the
procedure to correctly install the USB driver
(p. 127).
If any trouble occurs
Close all running applications, then restart it.
Carry out the following operations after
quitting the application:
– disconnect the USB cable
– turn on/off the power
132
Preview window/
1
2
Thumbnail list window/
(1)
(2)
•
•
•
–
–
–
–
–