Dubbing Only Desired Scenes - Digital Program Editing (Dcr-Trv140E Only) - Sony HANDYCAM VISION TRV208E Operating Instructions Manual

Dubbing only desired
scenes
– Digital program editing
– DCR-TRV140E only
You can duplicate selected scenes (programmes)
for editing onto a tape without operating the
VCR.
Scenes can be selected by frame. You can set up
to 20 programmes.
Unwanted scene/
Before operating the Digital program
editing function
Step 1 Connecting the VCR (p. 111).
Step 2 Setting the VCR for operation (p. 112 to
117).
Step 3 Adjusting the synchronisation of the
VCR (p. 118).
When you dub using the same VCR again, you
can skip steps 2 and 3.
Using the Digital program editing
function
Operation 1 Making the programme (p. 120).
Operation 2 Performing Digital program
editing (Dubbing a tape) (p. 122).
Step 1: Connecting the VCR
You can connect both the A/V connecting cable
and the i.LINK cable (DV connecting cable).
When you use the A/V connecting cable, connect
the devices as illustrated in page 98. When you
use the i.LINK cable (DV connecting cable),
connect the devices as illustrated in page 100.
–
–
Unwanted scene/
Switch the order/
1
2
3
1
2
111