Sony HANDYCAM VISION TRV208E Operating Instructions Manual page 52

Viewing the recording on TV
To connect to a TV without Video/
Audio input jacks (CCD-TRV107E/
TRV108E/TRV208E/TRV408E only)
Use a PAL system RFU adaptor (optional).
Refer to the operating instructions of your TV
and the RFU adaptor.
If your TV is a stereo type
(CCD-TRV107E/TRV108E/
TRV208E/TRV408E only)
Connect the audio plug of the A/V connecting
cable supplied to the left (white) input jack of
your TV.
If your TV/VCR has a 21-pin
connector (EUROCONNECTOR)
Use the 21-pin adaptor supplied with your
camcorder.
– DCR-TRV140E
– CCD-TRV107E/TRV108E/TRV208E/TRV408E
(European models only/
If your TV has an S video jack
Connect using an S video cable (optional) to
obtain optimum quality screen images.
With this connection, you do not need to connect
the yellow (video) plug of the A/V connecting
cable.
Connect an S video cable (optional) to the S video
jacks on both your camcorder and the TV.
To display the screen indicators on TV
Set DISPLAY to V-OUT/LCD in the menu
settings (p. 143). Then press DISPLAY on your
camcorder. To turn off the screen indicators,
press DISPLAY on your camcorder again.
52
TV
)
TV