Sony HANDYCAM VISION TRV208E Operating Instructions Manual page 126

Viewing images using your computer
– USB Streaming (Windows users only)
(4) Follow the on-screen messages to install the
USB driver.
(5) Connect the AC power adaptor to your
camcorder and then to a wall outlet.
(6) Set the POWER switch to CAMERA or
PLAYER.
(7) Select USB STREAM to ON in
settings (p. 142).
(8) With the CD-ROM inserted, connect the USB
jack on your camcorder to the USB connector
on your computer using the supplied USB
cable.
Your computer recognises the camcorder,
and the Windows Add Hardware Wizard
starts.
Computer/
(9) Follow the on-screen messages so that the
Add Hardware Wizard recoginises that the
USB drivers have been installed. The Add
Hardware Wizard starts three times because
three different USB drivers are installed. Be
sure to allow the installation to complete
without interrupting it.
If the "Files Needed" screen appears
(Windows 2000 Professional and Windows XP
users)
Set the CD-ROM on the CD-ROM driver then
select "Browse...." t "My Computer" t
"ImageMixer" t "sonyhcb.sys", and click the
"OK" button.
The installation is completed, proceed to
Installing "PIXELA ImageMixer Ver.1.0 for
Sony" on page 129.
126
in the menu
To the USB connector/
USB cable (supplied)/
(4)
(5)
(6)
(7)
(8)
To the (USB) jack/
(9)
t
t
t