Sony HANDYCAM VISION TRV208E Operating Instructions Manual page 100

Dubbing a tape
Using the i.LINK cable (DV connecting
cable) (DCR-TRV140E only)
Simply connect the i.LINK cable (DV connecting
cable) (optional) to
the DV products. With digital-to-digital
connection, video and audio signals are
transmitted in digital form for high-quality
editing. You cannot dub the screen indicators.
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2) Set the input selector on the VCR to DV IN if
it is available. Refer to the operating
instructions of your VCR for more
information.
(3) Set the POWER switch to PLAYER.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your
VCR for more information.
: Signal flow/
100
DV OUT and to DV IN of
DV OUT
(1)
(2)
(3)
(4)
(5)
i.LINK cable (DV
connecting cable)
(optional)/
DV S VIDEO
DV IN