Self-Diagnosis Display - Sony HANDYCAM VISION TRV208E Operating Instructions Manual

English

Self-diagnosis display

Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a 5-digit code (a combination
of a letter and figures) on the LCD screen, in the
viewfinder or in the display window.
If a 5-digit code is displayed, check the following
code chart. The last two digits (indicated by ss)
will differ depending on the state of your
camcorder.
Five-digit display
C:04:ss
C:21:ss
C:22:ss
C:31:ss
C:32:ss
E:20:ss
E:61:ss
E:62:ss
If you are unable to rectify the problem even if you try corrective actions a few times, contact
your Sony dealer or local authorised Sony service facility.
158
Cause and/or Corrective Actions
• You are using a battery pack that is not an "InfoLITHIUM"
battery pack.
c Use an "InfoLITHIUM" battery pack. (p. 174)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least
1 hour to acclimate. (p. 179)
• The video heads are dirty.
c Clean the heads using the Sony V8-25CLD cleaning cassette
(optional). (p. 180)
• A malfunction other than the above that you can service has
occurred.
c Remove the cassette and insert it again, then operate your
camcorder.
c Disconnect the mains lead of the AC power adaptor or
remove the battery pack. After reconnecting the power
source, operate your camcorder.
• A malfunction that you cannot service has occurred.
c Contact your Sony dealer or local authorised Sony service
facility and inform them of the 5-digit code. (example:
E:61:10)
LCD screen, viewfinder or
display window
C:21:00
Self-diagnosis display
•C:ss:ss
You can service your camcorder
yourself.
•E:ss:ss
Contact your Sony dealer or local
authorised Sony service facility.