2 Hardware Installation
2.1 Restrictions
2
Hardware Installation
Additional information regarding this product is available in MyABB portal
(https.//myportal.abb.com/home).
It is required that all applicable revisions and rollups for your system are installed
either previously or at the same time this firmware is installed. Industrial IT System
800xA SV 5.x/6.x System Software Versions (3BSE037782*) lists all the revisions
and rollups released for the above system version and includes links to the revisions
and rollups and associated release notes.
2.1
Restrictions
This is the first launch of FF LD 810HSE Ex. Hence, no restrictions with different articles
apply.
Table 2.1: Hardware Versions
You can look up the hardware version and the article number of the device on the
type plate.
In contrast to LD 800HSE Ex, the LD 810HSE Ex requires 10 mA from each H1
cannel.
Do not combine different module types in redundant pairs, i.e. do not combine a
Linking Device of type LD 810HSE Ex with other types such as LD 800HSE or
LD 800HSE Ex.
2PAA114135-610
Device Type
LD 810HSE Ex
Article Number
3BSE079522R1
Hardware Version
1.0
23