ADJ FOCUS BEAM LED User Instructions page 22

Focus Beam LED
INFORMATION - The submenus listed under INFORMATION are as follows: Fixture Life Time,
Total LED Time, Fixture Temps, Fan Info. (RPM), DMX Values, Error Logs, and Software Version.
- FIXTURE LIFE TIME
• Power On Time -The TOTAL power ON running time of the unit is displayed. This time CANNOT
be reset.
• P-On Time-R - The CURRENT power ON running time of the unit is displayed. This running time
may not be the same as the total power ON running time displayed under "Power On Time". This
time CAN be reset. NOTE: The displayed time represents the current power ON time since the
last reset.
• P-On Time-Reset - Reset the CURRENT power ON running time that is displayed under "P-On Time-R".
- TOTAL LED TIME
• LED On Time - The TOTAL LED ON time is displayed. This total LED ON time CANNOT be reset.
NOTE: The displayed time represents the TOTAL LED ON time.
• LED On Time-R - The CURRENT LED ON running time is displayed. This running time may not
be the same as the total LED ON time displayed under "LED On Time". This total LED ON time
CAN be reset. NOTE: The displayed time represents the current LED ON time since the last
reset.
• LED On Time Reset - With this function you can reset the CURRENT LED ON time that is displayed
under "LED On Time-R".
- FIXTURE TEMPS
• LED - The current temperature of the LED is displayed.
• Reset LED Temp - Reset the LED temperature reading.
- FAN INFO. (RPM) - In this submenu the current fan speed will be displayed.
- DMX VALUES - Displays the DMX values of any DMX channel that is currently in use. NOTE: DMX
value options depend on the current DMX channel mode setting.
- ERROR LOGS - In this submenu you are able to check any unit errors as well a clearing the error
log.
- SOFTWARE VERSION - Current software version is displayed.
ADJ Products, LLC - www.adj.com - Focus Beam LED User Manual Page 21
System Menu