Table of Contents
Advertisement
Phonebook Configuration Page
Contacts
The SCADADroid can have up to 100 contacts in the phonebook. Contacts can be modified
by clicking
or deleted by clicking
to contacts but is not necessary. An individual can have more than one entry if they need
to belong to more than one group or shift.
Name:
Each contact should have either a name or an identifier (ex. Night Shift).
Group:
Each contact must belong to a group. When an alarm occurs, the SCADADroid
will contact the members of the 1
using shifts if needed.
Shift:
Each contact must belong to a shift. The shift determines the applicable
times at which the SCADADroid can notify an individual. When an alarm occurs,
the SCADADroid will contact the members of the current call group only if they are on
shift. If shifts are not desired, assign every contact to the 24/7 shift that comes default
with the SCADADroid.
. It is recommended to setup shifts prior
st
call group first. Contacts may be further refined
Setting Up The R2
29
Advertisement
Table of Contents
Need help?
Do you have a question about the SCADADroid R2 and is the answer not in the manual?
Questions and answers