Table of Contents
Advertisement
5. Return Top Plate To Unit
Return the top plate to the unit and
replace
the
screws. The unit's peripherals can now
be re-attached and the unit powered.
6. Reconnect Peripherals
Return any peripherals to their original position and proceed with setup.
10
Setting Up The R2
previously
removed
Do not power unit up without the antenna!
DIN rail where the module is installed has to
be bonded to ground.
Important:
Important:
Advertisement
Table of Contents
Need help?
Do you have a question about the SCADADroid R2 and is the answer not in the manual?
Questions and answers