Table of Contents
Advertisement
Connecting to the SCADADroid
Once all necessary peripherals are
connected and the SIM is installed, power
the unit up and connect a computer to
the Ethernet port. The unit supports a
direct connection as well as a connection
through a switch/router. Once connected,
open any web browser and enter the
default IP in the URL: https:/192.168.1.15.
A username and password prompt should
appear. The default username is "admin"
and the default password is "password"
14
Setting Up The R2
Web Browser Configuration
(case sensitive). A web page warning
dialogue will appear warning you about
the certificate the site is trying to issue
you. Add the exception to your browser
and proceed. The reason for this warning
is that the SCADADroid issues a certificate
with no expiry to save on data usage. The
interface is fully encrypted. The admin
password should be changed immediately
for security reasons.
Advertisement
Table of Contents
Need help?
Do you have a question about the SCADADroid R2 and is the answer not in the manual?
Questions and answers