Download Print this page
Neptronic BM000 Specification And Installation Instructions

Neptronic BM000 Specification And Installation Instructions

Advertisement

Quick Links

Technical
Data
1
Fail safe
No
Power
6
consumption
VA
Peak,6VA
50 in.lb. [5.6 Nm]
Torque
at rated voltage
Running time
20 to 30 sec
through 90º
torque dependant
Auxiliary
switches
Ingress
IP54 equivalent to Nema type 3R if water tight inlet bushings
protection
Feedback
Power supply
Electrical
connection
Inlet bushing
Control signal
Angle of
rotation
Direction of
rotation
Ambient
temperature
Storage
temperature
Relative
Humidity
Weight
Dimensions
1
Enerdrive System U.S.A. Patent #5,278,454
BM-181119
Features:
Mounts easy on round & square shaft (with option –8)
External clutch for manual adjustments
Maintenance free
Position indicator
Control signal fully programmable
The fastest actuator of the world (model BM_ _ _FF)
Fail safe by Enerdrive System
Auxiliary switches (on model 020 & 080)
Yes
No
Yes
15VA
15
24VA
VA
Peak,15VA
35 in.lb. [3.9 Nm] at
rated voltage
3.5 to 4.5 sec
torque dependant
No
IP22 equivalent to Nema type 2,
(not supplied NEP617) are installed
Analog, Digital or Pulse with modulation (PWM) programmable (factory set with Analog control signal)
0 to 90 degrees, mechanically adjustable (factory set with 90º stroke)
Reversible, Clockwise (CW), or Counterclockwise (CCW) (factory set with CW direction)
Warning: Do not press the clutch when actuator is powered.
Specification and Installation Instructions
1
(on model 060 & 080)
No
Yes
No
15
24VA
6
VA
Peak,15VA
VA
Peak,6VA
25 in.lb. [2.8 Nm] at
50 in.lb. [5.6 Nm]
rated voltage
at rated voltage
1.5 to 2.5 sec
20 to 30 sec
torque dependant
torque dependant
4 to 20 mA or 2 to 10 Vdc adjustable
22 to 26 Vac or 28 to 32 Vdc
2
18 AWG [0.8 mm
] minimum
2 inlet bushings: 13/16" [20.6mm]
-22ºF to 122ºF [-30ºC to 50ºC]
-22ºF to 122ºF [-30ºC to 50ºC]
5 to 95 % non condensing.
3 lbs. [1.4 kg]
Dimension
A
B
C
model 000 & 060
D
model 020 & 080
BM Series Actuators
Yes
No
Yes
15VA
15
24VA
VA
Peak,15VA
35 in.lb. [3.9 Nm] at
rated voltage
3.5 to 4.5 sec
torque dependant
Yes (2)
IP22 equivalent to Nema type 2
Inches (in)
1.50
3.64
6.60
3.02
3.81
BM000
BM020
BM060
BM080
BM000F
BM020F
BM060F
BM080F
BM000FF
BM020FF
BM060FF
BM080FF
No
Yes
15
24VA
VA
Peak,15VA
25 in.lb. [2.8 Nm] at
rated voltage
1.5 to 2.5 sec
torque dependant
Metric (mm)
38.1
92.5
167.5
76.8
96.8
1

Advertisement

loading

Summary of Contents for Neptronic BM000

  • Page 1 BM Series Actuators Specification and Installation Instructions BM000 Features: BM020  Mounts easy on round & square shaft (with option –8) BM060  External clutch for manual adjustments BM080  Maintenance free BM000F  Position indicator BM020F  Control signal fully programmable BM060F ...
  • Page 2 ® We strongly recommend that all Neptronic products be wired to a separate transformer and that transformer shall service only Neptronic products. This precaution will prevent interference with, and/or possible damage to incompatible equipment. When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
  • Page 3 If PWM mode is selected; when programming is done - If DIP switch #3 is ON, PWM uses 5-second pulse - If DIP switch #3 is OFF, PWM uses 25-second pulse Stroke adjustment see the stroke adjustment section above. www.neptronic.com...
  • Page 4 For example, a minimum voltage of 5V and a maximum voltage of 7V represent a difference of 2V. Note: To reset zero and span to 2 to 10 Vdc (factory value), re-select the analog control signal mode, see Programming. www.neptronic.com...

This manual is also suitable for:

Bm seriesBm020Bm080Bm060Bm000fBm020f ... Show all