Neptronic BT060X8 Specification & Installation Instructions

Technical Data
Power supply
Auxiliary switches
Torque
Fail safe - Enerdrive
Power consumption
Control signal
Running time through 90º
Electrical connection
Inlet bushing
Angle of rotation
Direction of rotation
Ambient temperature
Operation
Storage temperature
Relative Humidity
Enclosure type
Weight
Warning: Do not press the clutch when actuator is powered
Warning for BT160/260/180/280X8: High Voltage. Risk of electric chock.
Dimensions
D
C
Caution
We strongly recommend that all neptronic® products be wired to a separate transformer and that transformer shall service only neptronic® products. This precaution will
prevent interference with, and/or possible damage to incompatible equipment.
When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
1
Enerdrive System U.S.A. Patent #5,278,454
BT-X8/060303
Feature:
• Designed to operate reliably in smoke control systems requiring
Underwriter's Laboratories UL555S (rated at 250˚F).
• Mounts easy on round & square shaft (optional).
• External clutch for manual adjustments.
• Maintenance free.
• Position indicator.
• Fail safe by Enerdrive System
• 2 auxiliary switches (only on models 080, 180 & 280)
BT060X8 BT160X8
22 to 26VAC 110 to 130 VAC
50/60Hz or 24VDC 50/60Hz
No
0 to 90 degrees, mechanically adjustable (factory set with 90º stroke)
Reversible, Clockwise (CW) or Counterclockwise (CCW) (factory set with CW direction)
A
B
Actuator for smoke damper
Specification
1
BT260X8 BT080X8
220 to 250 VAC 22 to 26VAC
50/60Hz 50/60Hz or 24VDC
70 in.lb. [8 Nm] at rated voltage
Yes
Running 15VA, Holding 5VA
2 wire / 2 position
20 to 30 sec Torque dependant
Fail safe: 15 sec. max at rated torque.
2
18 AWG [0.8mm ] minimum
2 inlet bushing of 5/8 in [15.9 mm] & 7/8 in [22.2 mm]
0ºF to +122ºF [-18º C to +50º C]
3 cycles at +250˚F [+121º C]
-22ºF to +122ºF [-30º C to +50º C]
5 to 95 % non condensing.
NEMA type 2 / IP42
3 lbs. [1.4 kg]
Dimension
& Installation instruction
BT180X8
110 to 130 VAC
50/60Hz
2 switches rated 250VAC, 5A
switching points: 5˚ & 85˚ +/-5˚
Inches
A 1.50
B 3.26
6.60
C
D 3.72
BT060X8
BT160X8
BT260X8
BT080X8
BT180X8
BT280X8
BT280X8
220 to 250 VAC
50/60Hz
Metric (mm)
38.1
82.8
167.5
94.5
1