Table of Contents
Advertisement
5.
Hardware revision history and known issues
5.1
Identifying product ID and revision
The revision and product identifier of Xplained Pro boards can be found in two ways, through Atmel Studio or
by looking at the sticker on the bottom side of the PCB.
By connecting a Xplained Pro MCU board to a computer with Atmel Studio running, an information window will
pop up. The first 6 digits of the serial number, which is listed under kit details, contain the product identifier and
revision. Information about connected Xplained Pro extension boards will also appear in the Atmel Kits window.
The same information can be found on the sticker on the bottom side of the PCB. Most kits will print the identifi-
er and revision in plain text as A09-nnnn\rr where nnnn is the identifier and rr is the revision. Boards with limited
space have a sticker with only a QR-code which contains a serial number string.
The serial number string has the following format:
"nnnnrrssssssssss"
n = product identifier
r = revision
s = serial number
The kit identifier for SAM4L Xplained Pro is 1783.
5.2
Revision 2
Revision 2 of SAM4L Xplained Pro is the initial released version, there are no known issues.
Atmel SAM4L Xplained Pro [USER GUIDE]
17
42074A-MCU-02/13
Advertisement
Table of Contents
Need help?
Do you have a question about the Xplained Pro SAM4L and is the answer not in the manual?
Questions and answers