Dear Customer! We thank you for purchasing Neoline G-Tech X27. Please read this manual carefully and thoroughly to use the device properly and extend its life. Keep the manual to refer to it in case it becomes necessary in future.
• Do not disassemble or modify the device. the correct operation of the GPS module may be impaired. Determine the • Neoline is not responsible for any data loss and / or damage (direct or radio transparency spot on the windshield of your car, using, for example, indirect) incurred to the user or third party by misusing the device or polarized glasses.
This user manual is valid at the time of printing. The latest information can be • Input voltage: DC 5V, 1.5 A found on the www.neoline.ru website in the corresponding product tab in • Input voltage of recorder: DC 12-24 V the Download section.
[ Device and buttons description ] [ Buttons ] 1. POWER Short press turns on the device. Long press – turns off the device. Short press in the operation mode turns the screen backlight on / off. 2. MENU Pause the video recording by pressing the UP / REC button. In Standby mode, a short press opens the settings menu, a second press switches the settings section.
Page 5
5. DOWN/MIC Short press in Video mode turns the microphone on / off. In the Settings menu the button is used to move through the menu items (down). In Play mode pressing the button allows you to select a video or photo for playing / viewing. While a video is being played, pressing the button starts to fast forward.
[ Installation ] Fix the DVR to the rear-view mirror using the supplied ties. Installation on the standard rear-view mirror The DVR is equipped with sliding clamps for installation on the standard rear-view mirror. ATTENTION! Make sure that the length of the sliding clamps is wider than the width of the standard rear-view mirror.
Page 7
nstalling and using the rear-view camera 4. Connect the power cable to the reversing light wiring so that the Install the rear-view camera according to Fig. 1 video from the rear-view camera is displayed in full screen mode when you switch the gearbox to the reverse mode. If you do not connect the power to the reverse light wiring, the rear-view camera will record the video, but will not automatically switch to full screen mode.
Use only the supplied power adapter to power the device and charge the battery. Connect one end of the power adapter to the mini USB connector on Press the POWER button to turn the DVR on. After the Neoline logo the device. appears on the screen, the device turns on.
- Download the file with the firmware from the official website www. - Use the Up / Down buttons to select the file you want to view and neoline.com, extract the file from the archive. press the Confirm button to start playing.
Page 10
Speed limit Deleting files Enter the Play menu using the MODE button. Use the Up / Down buttons to select the file you need. Press the MENU button to open a file deleting menu. Choose the necessary function using Up / Down buttons. Menu line Description Distance to safety...
Page 11
- When passing the 2nd camera, there will be a notification of video Speed control transport lane control control ending - When you leave the road between two cameras Neoline G-Tech X27 Traffic control will reset the alert according to its algorithm within 10 minutes Crossroads post...
Page 12
Update GPS-base safety warning cameras: 5. Click the ‘’Update’’ button and wait for the update to complete. 1. Disconnect the GPS module from the device. 2. Connect the module to the PC via a Micro USB cable. GPS module will be displayed It appears as a removable disk in the device list.
Page 13
- Date format: Year-Month-Date / Month-Date-Year / - additional excess: Off Date-Month-Year In this case, the device will alert when the speed exceeds 61 km/h. - Data fixed on the screen: Date + NEOLINE logo / Date / NEOLINE Logo / Off...
Example B: - speed limit: 60 km/h An image is dark when photographing the sky or water - additional excess: 10 km/h If there is a large contrast in the scene, this will affect the exposure. In this case, the device will alert when the speed exceeds 71 km/h. Change the exposure setting in the menu.
Need help?
Do you have a question about the G-Tech X27 and is the answer not in the manual?
Questions and answers