Oracle Sun Fire X4470 Product Notes page 36

Oracle ILOM Known Issues
Bug ID
15624521
15656571
15685821
36 Sun Fire X4470 Server Product Notes • September 2018
Description
For example, use one of the following commands:
Using IPMI:
ipmitool power cycle
Using the Oracle ILOM web interface:
Cycle
Unable to Launch Oracle ILOM Remote Console Using JRE 1.6.0 U14, U15, and U16
Issue::
If you try to launch the Oracle ILOM Remote Console via the web using some builds of Java
Runtime Environment (JRE), the system returns the error Unable to Launch the Application.
Affected Operating Systems and Software:
■ All operating systems using JRE 1.6.0, U14, U15, and U16
■ Release 1.0 and later
Workaround:
Upgrade to JRE 1.6.0 U17 or later.
Erroneous Error Message Is Returned When Serial Port Owner Is Changed
Issue:
If you use the Configuration → Serial Port tab in the Oracle ILOM web interface to change the serial
port owner, changes to the port owner take effect, but the system returns the error Cannot change
serial settings - the serial console in use.
Affected Software:
■ Release 1.0 and later
Workaround:
Ignore the error message.
Serial Port Ownership Cannot Be Changed On Serial Console
Issue:
If you are logged in to Oracle ILOM from the serial console, and you set the serial port owner to
host, you cannot set the serial port owner back to SP.
Affected Software:
■ Release 1.0 and later
Workaround:
To avoid this problem, ensure that you are not logged in to the serial console, and then change
console port ownership using an SSH session.
If the problem occurs, you can recover by rebooting the system.
Remote Control → Remote Power Control → Power