Mechanism Adjusting Procedure Chart At A Glance - JUKI LU-2210N-7 Engineer's Manual

10. Mechanism Adjusting Procedure Chart at a Glance

When adjusting the items 1) through 8), also adjust the related components according to the arrows.
1) [3.-(4)-2) Clearance between the Needle and the
Blade Point of Hook]
2) [3.-(5) Clearance between the Throat Plate and the
Inner Hook Stopper]
3) [3.-(6)-1) Horizontal Feed Timing]
4) [3.-(13)-1) Timing of the Opener]
5) [3.-(11)-5) Height of the Moving Knife]
[3.-(4)-3) Timing between the Needle and the Hook]
[3.-(4) 2) Clearance between the Needle and the
Blade Point of Hook]
[3.-(10), 3-(11) and 3.-(12) Thread Trimmer Device]
[3.-(6)-2) Vertical Feed Timing]
[3.-(11)-7), 3.-(11)-8) and 3.-(12)-11) Thread Trimmer
Cam]
[3.-(4)-2) Clearance between the Needle and the
Blade Point of Hook]
[3.-(4)-3) Timing between the Needle and the Hook]
[3.-(10)-4) Moving Knife Driving Arms A, B and C]
[3.-(11)-7 Thread Trimmer Cam]
– 103 –