JUKI LU-2210N-7 Engineer's Manual page 110

6) [5.-(3) How to replace the Timing Belt]
7) [5.-(1) How to replace the Needle Clamp]
8) [5.-(4) How to change from 1-needle to 2-needle
specifications]
[3.-(4)-3) Timing between the Needle and the Hook]
[3.-(6)-1) Horizontal Feed Timing]
[3.-(6)-2) Vertical Feed Timing]
[3.-(6)-4) Height of the Feed Dog]
[3.-(3) Needle Entry]
[3.-(4)-2) Clearance between the Needle and the
Blade Point of Hook]
[3.-(4)-3) Timing between the Needle and the Hook]
[3.-(5) Clearance between the Throat Plate and the
Inner Hook Stopper]
[3.-(2) Sewing Speed]
[3.-(3) Needle Entry]
[3.-(4)-2) Clearance between the Needle and the
Blade Point of Hook]
[3.-(4)-3) Timing between the Needle and the Hook]
[3.-(5) Clearance between the Throat Plate and the
Inner Hook Stopper]
[3.-(10) Thread Trimmer Device]
[3.-(13) Opener]
[5.-(2) Replacement of the Presser Adjusting Spring]
[3.-(16) Lubricating Unit]
[3.-(2) Sewing Speed]
– 104 –